DiffAmp
TIH-engineering·DiffAmp·pcb/DiffAmp.kicad_pcb
About the DiffAmp PCB
DiffAmp is an open source PCB design by TIH-engineering, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 70 × 40 mm, with 35 components from 11 distinct parts.
Other key parts include the LM358. By type, the board carries 16 connectors, 11 resistors, 3 transistors, 1 IC, 1 diode and 1 capacitor.
From the project
Die Leiterplatte DiffAmp dient zur praktischen Untersuchung von Differenzverstärkern. Sie ermöglicht den Vergleich einer diskret mit Transistoren aufgebauten Differenzverstärkerstufe mit einem Differenzverstärker auf Basis eines Operationsverstärkers.
Die Leiterplatte DiffAmp dient zur praktischen Untersuchung von Differenzverstärkern. Sie ermöglicht den Vergleich einer diskret mit Transistoren aufgebauten Differenzverstärkerstufe mit einem Differenzverstärker auf Basis eines Operationsverstärkers.
Die Leiterplatte enthält zwei unterschiedliche Schaltungsvarianten:
- Differenzverstärker mit zwei Bipolartransistoren - Differenzverstärker mit Operationsverstärker (Subtrahierer)
Main components on the DiffAmp
DiffAmp bill of materials (BOM)
35 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM358 | DIP-8_W7.62mm | U1 |
| 3 | BC547 | TO-92_Inline_Wide | Q1, Q2, Q3 |
| 10 | Conn_01x01_Pin | PinHeader_1x01_P2.54mm_Vertical | J1, J2, J3, J4, J5, J8, J13, J14 +2 |
| 6 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J6, J7, J9, J10, J11, J12 |
| 1 | 50k | Potentiometer_Bourns_3005_Horizontal | RV1 |
| 1 | 1k | Potentiometer_Bourns_3005_Horizontal | RV2 |
| 1 | 4V7 | D_A-405_P10.16mm_Horizontal | D1 |
| 1 | 100n | C_Disc_D3.8mm_W2.6mm_P2.50mm | C1 |
| 5 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3, R4, R6, R7 |
| 4 | 2k2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R5, R8, R9 |
| 2 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10, R11 |
DiffAmp design files
The KiCad project lives in the TIH-engineering/DiffAmp repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/DiffAmp.kicad_pcb
- Schematicpcb/DiffAmp.kicad_sch
DiffAmp: common questions
How big is the DiffAmp PCB?
The DiffAmp measures 70 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DiffAmp?
35 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the DiffAmp design files?
From the TIH-engineering/DiffAmp repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DiffAmp design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.