Remote
timbelmon·CAD_Hydrofoil·KiCad_Remote/Remote.kicad_pcb
About the Remote PCB
Remote is an open source PCB design by timbelmon, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 65 mm, with 9 components from 8 distinct parts.
Other key parts include the NRF24L01_Breakout. By type, the board carries 3 capacitors, 2 connectors, 2 resistors, 1 IC and 1 switch.
From the project
Building a self-stabilizing RC hydrofoil.
Semester project focused on developing a self-stabilizing RC hydrofoil.
The system uses a T-foil design with custom PCB-based water sensors acting as the control “legs” to detect water contact and stabilize the craft in real time.
Core components: - Custom-designed hydrofoil (CAD) - Self-manufactured PCBs (water sensing + control) - Arduino-based control system

Main components on the Remote
Remote bill of materials (BOM)
9 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NRF24L01_Breakout | nRF24L01_Breakout | U1 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_MaiXu_MX126-5.0-04P_1x04_P5.00mm | J1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J2 |
| 1 | SW_Wuerth_450301014042 | SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1 |
| 2 | 100n | C_Disc_D3.4mm_W2.1mm_P2.50mm | C1, C2 |
| 1 | 10u | CP_Radial_D4.0mm_P2.00mm | C3 |
| 1 | 5k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 10k | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | R2 |
Remote design files
The KiCad project lives in the timbelmon/CAD_Hydrofoil repository on GitHub; these links point at the commit this page was built from.
- LayoutKiCad_Remote/Remote.kicad_pcb
- SchematicKiCad_Remote/Remote.kicad_sch
Remote: common questions
How big is the Remote PCB?
The Remote measures 80 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Remote?
9 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Remote design files?
From the timbelmon/CAD_Hydrofoil repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Remote design in my own project?
Yes, under the terms of its MIT license, which timbelmon chose for the repository.