SafeKeyVault
Toasterfire-come·SafeKeyVault·Hardware/1.kicad_pcb
About the SafeKeyVault PCB
SafeKeyVault is an open source STM32 PCB design by Toasterfire-come, published on GitHub. It is a 2-layer board measuring 85.5 × 54 mm, with 23 components from 17 distinct parts.
Its main chip is the STM32U535RETxQ, from the STM32 family. Other key parts include the AMS1117-3.3, C97521, W25Q128JVFIQ, ATECC608A-SSHDA-T and TTP223-BA6. By type, the board carries 7 ICs, 6 capacitors, 4 resistors, 3 diodes, 1 crystal and 1 connector.
From the project
This project is designed to be a copmplete and total alternative to managed password holders.
This project is designed to be a copmplete and total alternative to managed password holders. Including features like one click copy for authenticators which allows the same access as a microsoft auth, but with more controll. Additionaly features like autofill, and hardware key capabilities are all wrapped in the same authenticator. There is one universal settings and interface (HTML) to allow for any device with a browser to open and use passwords. This board was desiged as complete alternative to web extentions or websites having a data breach and you loosing all of your passwords. Features…
Main components on the SafeKeyVault
SafeKeyVault bill of materials (BOM)
23 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32U535RETxQ | LQFP-64_10x10mm_P0.5mm | U1.1 |
| 1 | AMS1117-3.3 AMS | SOT-223-3_TabPin2 | U3 |
| 1 | C97521 W25Q128JVFIQ TR Winbond(华邦) | SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | W25Q128JVFIQ Winbond(华邦) | SOIC-16_3.9x9.9mm_P1.27mm | U5 |
| 1 | ATECC608A-SSHDA-T null | SOT-23-8 | U6 |
| 1 | TTP223-BA6 null | SOT-23-6 | U7 |
| 1 | 100NF C_touch (100 nF) null | C_0603_1608Metric | U11 |
| 1 | 16MHZ 16MHz NDK | Crystal_SMD_3225-4Pin_3.2x2.5mm | X1 |
| 1 | C2765186 USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | USBLC6-2SC6 ST(意法半导体) | SOT-23-6 | D1 |
| 2 | APA102 | LED-APA102-2020 | D2, D3 |
| 1 | C1046 4.7µH | L_0603_1608Metric | L1 |
| 3 | 100NF 100nF | C_0603_1608Metric | C1, C5, C6 |
| 2 | 12PF 12pF | C_0603_1608Metric | C2, C3 |
| 1 | C15849 1µF | C_0603_1608Metric | C4 |
| 2 | 5.1kΩ | R_0603_1608Metric | R1, R2 |
| 2 | 4.7kΩ | R_0603_1608Metric | R3, R5 |
SafeKeyVault design files
The KiCad project lives in the Toasterfire-come/SafeKeyVault repository on GitHub; these links point at the commit this page was built from.
- LayoutHardware/1.kicad_pcb
- SchematicHardware/1.kicad_sch
- BOMHardware/BOM.csv
SafeKeyVault: common questions
What microcontroller does the SafeKeyVault use?
The SafeKeyVault is built around the STM32U535RETxQ, from the STM32 family.
How big is the SafeKeyVault PCB?
The SafeKeyVault measures 85.5 × 54 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SafeKeyVault?
23 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SafeKeyVault design files?
From the Toasterfire-come/SafeKeyVault repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SafeKeyVault design in my own project?
The repository has no license, so all rights stay with Toasterfire-come. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SafeKeyVault without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k