45 open source boards using the C97521

Real designs built with the C97521, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

45 boardsClear filters|Most starred

How designs wire the C97521

Read from the KiCad layouts of 38 open source designs, one per repository: what each pin of the C97521 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 29 of 36 designs, most often 100 nF (then 1 µF).
  • The CS pin has a series resistor on 25 of 38 designs, most often 1 kΩ (then 5.1 kΩ).
  • The CS pin has a pull-up to 3.3V on 21 of 38 designs, most often 10 kΩ (then 0 Ω).
CSpin 1Connected to: C2040 50%
  • Series resistor on 66% · 1 kΩ (24), 5.1 kΩ (1), 0 Ω (1)
  • Pull-up to 3.3V on 55% · 10 kΩ (12), 0 Ω (1)
GNDpin 4Connected to: GND 83%
VCCpin 8Connected to: 3.3V 92%
  • Decoupling capacitor on 81% · 100 nF (40), 1 µF (4), 10 µF (4)

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Main board by JesusFreke, Pico stretch by jvanderberg, Rana Tadpole DB by rana-sylvatica and Pixie device by firefly.

The C97521 in open source designs

The gallery holds 45 open source boards using the C97521 from 39 GitHub repositories; a typical one measures about 82.6 × 66 mm and carries around 72 components.

64% are two-layer designs, the rest use four layers or more, and 24% carry an open source license.

The most starred is Main board by JesusFreke.

Microcontrollers on boards using the C97521

C97521: common questions

Where can I find a C97521 reference design?

Each of the 45 boards on this page is a real design using the C97521. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the C97521 VCC pin?

The VCC pin has a decoupling capacitor on 29 of 36 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 38 open source designs using the C97521.

What resistor goes on the C97521 CS pin?

The CS pin has a series resistor on 25 of 38 designs, most often 1 kΩ (then 5.1 kΩ). Counted from the KiCad layouts of 38 open source designs using the C97521.

What parts are used alongside the C97521?

The C2040, C6186, C26537, C42411118 and C7519 appear in the most repositories here.

Which microcontrollers do boards using the C97521 use?

Most are built on RP2040/RP2350 (36), STM32 (4), ESP32 (2) and FPGA (1).

How big is a typical board using the C97521?

The median is 82.6 × 66 mm, and 64% are two-layer designs.

What is the most popular open source board using the C97521?

By GitHub stars, Main board by JesusFreke, with 993 stars.

Can I simulate one of these boards using the C97521 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part