Quick nic
tobycm·quick-nic·pcb/quick-nic.kicad_pcb
About the Quick nic PCB
Quick nic is an open source PCB design by tobycm, published on GitHub under the MIT license. It is a 6-layer board measuring 50 × 20 mm, with 25 components from 15 distinct parts.
Other key parts include the CH217A and RTL8153B-VB-CG. By type, the board carries 14 capacitors, 5 resistors, 2 ICs, 1 crystal, 1 connector and 1 inductor.
From the project
usb 3 to ethernet adapter :b
A homemade USB 3 to Gigabit Ethernet adapter. Equipped with RTL8153B and MagJack connector (integrated magnetics) for small footprint.

Main components on the Quick nic
Quick nic bill of materials (BOM)
25 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH217A | SOT-23-6 | U1 |
| 1 | RTL8153B-VB-CG REALTEK(瑞昱) | QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm | U2 |
| 1 | 25MHZ 25Mhz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | HC-USB3.0-C26 | USB-3.0-A-SMD_HC-USB3.0-C26 | J1 |
| 1 | HR911130A HANRUN(汉仁) | RJ45-TH_HR911130A | RJ1 |
| 1 | C85840 220Ω@100MHz | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | FB1 |
| 2 | 10U 10u | C_0603_1608Metric | C1, C11 |
| 3 | 100N 100n | C_0603_1608Metric | C2, C3, C13 |
| 2 | 33P 33p | C_0603_1608Metric | C4, C5 |
| 6 | 1u | C_0603_1608Metric | C6, C7, C8, C9, C10, C14 |
| 1 | 1n | C_1206_3216Metric | C12 |
| 1 | 2.49K 2.49k | R_0603_1608Metric | R1 |
| 2 | 470 | R_0603_1608Metric | R2, R3 |
| 1 | 62K 62k | R_0603_1608Metric | R4 |
| 1 | 1M | R_0603_1608Metric | R6 |
Quick nic design files
The KiCad project lives in the tobycm/quick-nic repository on GitHub; these links point at the commit this page was built from.
Quick nic: common questions
How big is the Quick nic PCB?
The Quick nic measures 50 × 20 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Quick nic?
25 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Quick nic design files?
From the tobycm/quick-nic repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Quick nic design in my own project?
Yes, under the terms of its MIT license, which tobycm chose for the repository.