4 open source boards using the CH217A

Real designs built with the CH217A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The CH217A in open source designs

The gallery holds 4 open source boards using the CH217A from 4 GitHub repositories; a typical one measures about 70.1 × 50 mm and carries around 80 components.

75% use four copper layers or more, and 75% carry an open source license.

The most starred is Isolated reindvstrialize usb hub by American-Embedded.

Parts used alongside the CH217A

Microcontrollers on boards using the CH217A

What boards using the CH217A are built for

CH217A: common questions

Where can I find a CH217A reference design?

Each of the 4 boards on this page is a real design using the CH217A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the CH217A use?

Most are built on WCH CH32/CH55x (1).

How big is a typical board using the CH217A?

The median is 70.1 × 50 mm, and 25% are two-layer designs.

What is the most popular open source board using the CH217A?

By GitHub stars, Isolated reindvstrialize usb hub by American-Embedded, with 1 stars.

Can I simulate one of these boards using the CH217A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part