PCB-workshop
tolgacnar·PCB-workshop
About the PCB-workshop
PCB-workshop is an open source PCB design by tolgacnar, published on GitHub. It is a 2-layer board measuring 104 × 63 mm, with 9 components from 7 distinct parts.
Other key parts include the NA555P. By type, the board carries 4 resistors, 2 diodes, 1 IC, 1 switch and 1 capacitor.
From the project
introduction to PCB
Bu repository, T3 Vakfı tarafından Çankaya'da düzenlenen PCB (Printed Circuit Board) tasarımı workshopu kapsamında KiCad 9.0 ile hazırlanan iki farklı devre tasarımını içermektedir.
Temel bir LED sürücü devresidir. Güç girişinden gelen akımı direnç üzerinden LED'e ileten basit bir devre olup PCB tasarımına giriş amacıyla tasarlanmıştır.
- J1 → 2 pinli vida terminali ile güç girişi sağlanır. - R1 (350 Ω) → LED'e uygulanan akımı sınırlar. - D2 → Çıkış göstergesi olarak ışık saçar.
Main components on the PCB-workshop
PCB-workshop bill of materials (BOM)
9 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NA555P | DIP-8_W7.62mm | U1 |
| 1 | SW_Push | KSA_Tactile_SPST | SW1 |
| 2 | LED | D_5KPW_P7.62mm_Vertical_AnodeUp | D1, D2 |
| 1 | 4.7uF | CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C1 |
| 2 | 220 | R_Array_SIP4 | R1, R2 |
| 1 | 33K | R_Array_SIP4 | R3 |
| 1 | 1K | R_Array_SIP4 | R4 |
PCB-workshop design files
The KiCad project lives in the tolgacnar/PCB-workshop repository on GitHub; these links point at the commit this page was built from.
- Layoutflipflop.kicad_pcb
- Schematicflipflop.kicad_sch
PCB-workshop: common questions
How big is the PCB-workshop?
The PCB-workshop measures 104 × 63 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCB-workshop?
9 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCB-workshop design files?
From the tolgacnar/PCB-workshop repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PCB-workshop design in my own project?
The repository has no license, so all rights stay with tolgacnar. Use it as a reference, and ask the author before reusing the design.