18 open source boards using the NA555P
Real designs built with the NA555P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
M-NET-Thermostat
gajdi88
55.9 × 64.8 mm33 parts2LGPL-3.02- schematic only · 64 parts
FS-TUS-2026
Othello-Von-Ryan-9000
64 partsNo license1 RP2040/RP2350
All in one smc
nojan1
161.1 × 82.9 mm146 parts4LNo license0BitStack-DigiMind
RetroStack
80 × 65 mm44 parts2LMIT0AcClutchBoost
bhavsarp23
127 × 62.5 mm29 parts2LNo license0Tripple 555
sdp8483
51.5 × 41 mm21 parts2LMIT0Wireless Power Primary Side
sofiamonty
66 × 26 mm19 parts2LNo license0Ketchup
toniengineering
64.5 × 95 mm19 parts2LNo license0Servo-Motor-Tester
MAHESH-THILAK-K
28.6 × 34.3 mm10 parts2LNo license0PCB-workshop
tolgacnar
104 × 63 mm9 parts2LNo license0Jammer 555
Rdisrael
49.8 × 42.7 mm20 parts2LNo license2Main board
nojan1
230 × 100 mm74 parts4LNo license0My Project1
BenguetAime
44.3 × 30.9 mm8 parts2LNo license0Acionamento de buzzer 555
Rdisrael
38 × 27.4 mm8 parts2LNo license2ModulinEnvelope
ConDarth
50.8 × 177.8 mm47 parts2LNo license0Ex04-Chapter06
Sofianopoulou
82.6 × 29.2 mm9 parts2LMIT1LED Blink Using IC555
SelvaUx
35 × 45 mm8 parts2LNo license0Ne555-servo controller
Krzysiek-Mistrz
53.3 × 50.8 mm10 parts2LNo license0
How designs wire the NA555P
Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the NA555P connects to, and the resistors, capacitors and other passives placed on it.
- The THR pin has a capacitor to GND on 13 of 15 designs, most often 10 µF (then 4.7 µF).
- The TR pin has a capacitor to GND on 11 of 15 designs, most often 10 µF (then 100 nF).
- The CV pin has a capacitor to GND on 10 of 15 designs, most often 10 nF (then 100 nF).
- The DIS pin has a pull-up to 5V on 9 of 15 designs, most often 1 kΩ (then 1.8 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 93% | — |
| TRpin 2 | Connected to: Signal 100% |
|
| Qpin 3 | Connected to: Signal 100% |
|
| Rpin 4 | Connected to: VCC 67% · a signal 33% | — |
| CVpin 5 | Connected to: Signal 67% · not connected 33% |
|
| THRpin 6 | Connected to: Signal 100% |
|
| DISpin 7 | Connected to: Signal 100% |
|
| VCCpin 8 | Connected to: VCC 93% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include M-NET-Thermostat by gajdi88, Acionamento de buzzer 555 by Rdisrael, Ex04-Chapter06 by Sofianopoulou and My Project1 by BenguetAime.
The NA555P in open source designs
The gallery holds 18 open source boards using the NA555P from 16 GitHub repositories; a typical one measures about 55.9 × 50.8 mm and carries around 20 components.
88% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.
The most starred is M-NET-Thermostat by gajdi88.
Parts used alongside the NA555P
Microcontrollers on boards using the NA555P
What boards using the NA555P are built for
NA555P: common questions
Where can I find a NA555P reference design?
Each of the 18 boards on this page is a real design using the NA555P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the NA555P THR pin connected?
The THR pin has a capacitor to GND on 13 of 15 designs, most often 10 µF (then 4.7 µF). Counted from the KiCad layouts of 15 open source designs using the NA555P.
How is the NA555P TR pin connected?
The TR pin has a capacitor to GND on 11 of 15 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 15 open source designs using the NA555P.
How is the NA555P CV pin connected?
The CV pin has a capacitor to GND on 10 of 15 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 15 open source designs using the NA555P.
Which microcontrollers do boards using the NA555P use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the NA555P?
The median is 55.9 × 50.8 mm, and 88% are two-layer designs.
What is the most popular open source board using the NA555P?
By GitHub stars, M-NET-Thermostat by gajdi88, with 2 stars.
Can I simulate one of these boards using the NA555P before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.