HardLabs

Macropad

tomk1440-cmyk·macropad·pcb/controller.kicad_pcb

Macropad PCB layout, top view — open source board by tomk1440-cmyk

About the Macropad PCB

Macropad is an open source PCB design by tomk1440-cmyk, published on GitHub. It is a 2-layer board measuring 71 × 98.5 mm, with 11 components from 3 distinct parts.

Other key parts include the MOUDLE-SEEEDUINO-XIAO. By type, the board carries 9 switches and 1 IC.

It belongs with the keyboards designs in this gallery.

From the project

This picture shows how the pcb looks in 3D view in KiCad PCB itself was made in kicad

This picture shows how the pcb looks in 3D view in KiCad PCB itself was made in kicad

Bill Of Materials (BOM) is availible in /bom/bom.zip

This project is part of HackClub Stardance Check it out here: https://stardance.hackclub.com/projects/47211 you can follow me on:

Thank you for checking out my repo ### This project and repo is open-source ### Feel free to check out my other projects! ### firmware should be final

Macropad, from the project README
From the project README

Main components on the Macropad

MOUDLE-SEEEDUINO-XIAO

Macropad bill of materials (BOM)

11 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MOUDLE-SEEEDUINO-XIAO
U1
1
EC11E15244G1
ALPSALPINE(阿尔卑斯阿尔派)
ROT1
9
SW_Push
SW1, SW2, SW4, SW5, SW6, SW7, SW10, SW11 +1

Macropad design files

The KiCad project lives in the tomk1440-cmyk/macropad repository on GitHub; these links point at the commit this page was built from.

Macropad: common questions

How big is the Macropad PCB?

The Macropad measures 71 × 98.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Macropad?

11 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Macropad design files?

From the tomk1440-cmyk/macropad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Macropad design in my own project?

The repository has no license, so all rights stay with tomk1440-cmyk. Use it as a reference, and ask the author before reusing the design.

Similar boards