SnP-BinaryClock

tomlonca·SnP-BinaryClock

SnP-BinaryClock PCB layout, top view — open source AVR/Arduino board by tomlonca

About the SnP-BinaryClock PCB

SnP-BinaryClock is an open source AVR/Arduino PCB design by tomlonca, published on GitHub. It is a 2-layer board measuring 65.9 × 58 mm, with 17 components from 5 distinct parts.

Its main chip is the ATmega48-20P, from the AVR/Arduino family. By type, the board carries 11 diodes, 3 switches, 1 IC, 1 crystal and 1 battery holder.

From the project

This project is about designing and implementing a binary clock using an AtMega48 microcontroller and a custom PCB.

This project is about designing and implementing a binary clock using an AtMega48 microcontroller and a custom PCB.

Mode switching is done via three buttons on the top of the board.

- Bauen Sie eine Binäruhr mit dem ATmega48, benutzen Sie hierfür mindestens die ausgegebenen Bauteile - Pflicht Features:

1. Binäre Ausgabe auf 11 LED’s mit hardware PWM Helligkeitssteuerung (OC1x-Pin). 2. Steuerung über Taster (INT0, INT1, x). 3. Sleepmode mit Beweis der Reduzierten Leistungsaufnahme nach Datenblatt. 4. Zeitbasis über Timer und Uhrenquarz, mit Genauigkeitsmessung, Programmierung über ISP. 5.…

Main components on the SnP-BinaryClock

SnP-BinaryClock bill of materials (BOM)

17 components, 5 distinct parts.

QtyPartRefs
1
ATmega48-20P
U1
1
Crystal
Y1
1
Battery_Cell
BT1
3
SW_Push
SW1, SW2, SW3
11
LED
D1, D2, D3, D4, D5, D6, D8, D9 +3

SnP-BinaryClock design files

The KiCad project lives in the tomlonca/SnP-BinaryClock repository on GitHub; these links point at the commit this page was built from.

SnP-BinaryClock: common questions

What microcontroller does the SnP-BinaryClock use?

The SnP-BinaryClock is built around the ATmega48-20P, from the AVR/Arduino family.

How big is the SnP-BinaryClock PCB?

The SnP-BinaryClock measures 65.9 × 58 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SnP-BinaryClock?

17 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the SnP-BinaryClock design files?

From the tomlonca/SnP-BinaryClock repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the SnP-BinaryClock design in my own project?

The repository has no license, so all rights stay with tomlonca. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SnP-BinaryClock without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards