HardLabs

PanoBoard

TomNaiser·PanoBoard·PanoBoard5KiCad/PanoBoardV5.kicad_pcb

PanoBoard PCB layout, top view — open source AVR/Arduino board by TomNaiser

About the PanoBoard PCB

PanoBoard is an open source AVR/Arduino PCB design by TomNaiser, published on GitHub under the MIT license. It is a 2-layer board measuring 63.6 × 72.4 mm, with 39 components from 17 distinct parts.

Its main chip is the ARD NANO, from the AVR/Arduino family. Other key parts include the L298. By type, the board carries 12 diodes, 6 resistors, 5 crystals, 4 capacitors, 2 jumpers and 1 IC.

It belongs with the robotics & motion and iot & wireless designs in this gallery.

From the project

Electronics Board for a Gigapixel Panorama Head (pan and tilt motion)

The latest version PanoBoardV5 is a size-reduced version. With the shrunken electronics box the panorama rig fits into my photo backpack.

Warning! The circuits in this project were designed as a hobbyist project and may contain unintentional mistakes. I don't take any responsibility for damages caused by using the above circuit design. Please use the provided information at your own risk!

Main components on the PanoBoard

L298

PanoBoard bill of materials (BOM)

39 components, 17 distinct parts.

QtyPartRefs
1
L298
IC1
2
53?-04047
X1, X2
2
53?-04048
X3, X4
1
53?-03048
X6
1
POWER_JACK
J3
3
—
@HOLE0, @HOLE2, @HOLE3
1
ARD NANO
ARDUINO_NANO1
2
PINHD-2X2
JP2, JP3
2
SFH618?A
OK1, OK2
1
450302014072
S1
1
BlueSmirf Gold
SV3
8
DIODE-D-5
D1, D2, D3, D4, D5, D6, D7, D8
4
LED1206
D9, D11, D12, D13
2
100nF
C1, C2
2
CPOL-EUE3.5-10
C3, C4
5
220 ohm
R1, R2, R8, R11, R12
1
1k
R10

PanoBoard design files

The KiCad project lives in the TomNaiser/PanoBoard repository on GitHub; these links point at the commit this page was built from.

PanoBoard: common questions

What microcontroller does the PanoBoard use?

The PanoBoard is built around the ARD NANO, from the AVR/Arduino family.

How big is the PanoBoard PCB?

The PanoBoard measures 63.6 × 72.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PanoBoard?

39 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the PanoBoard design files?

From the TomNaiser/PanoBoard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the PanoBoard design in my own project?

Yes, under the terms of its MIT license, which TomNaiser chose for the repository.

Can I test firmware for the PanoBoard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards