Vonreg Bottom
About the Vonreg Bottom PCB
Vonreg Bottom is an open source PCB design by tompi, published on GitHub. It is a 2-layer board measuring 68.6 × 83.6 mm, with 9 components from 5 distinct parts.
By type, the board carries 3 transformers, 1 connector and 1 buzzer.
It belongs with the keyboards designs in this gallery.
From the project
The Vonreg is an attempt at exploiting 3 dimensions with just pcb. (vertical thumb cluster)
The Vonreg is an attempt at exploiting 3 dimensions with just pcb. (vertical thumb cluster)
N.B: Although this board works fine, its a bit difficult to use, since it will slide around, due to only 2 edges touching the table.
To build it you need to order pcbs, check out the releases.
You will also need the following parts: 2 x Blackpill MCU 2 x TRRS Jack 36 x MX switches and keycaps 4 x 2.54mm Double Row Right angle Male Breakaway PCB Board Pin Header Connector(2x5 pins) 1 x USB C cable 1 x TRRS cable (only need 3 poles)
Vonreg Bottom bill of materials (BOM)
9 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AudioJack4 | TRRS-PJ-320A-dual | J1 |
| 1 | Buzzer | MagneticBuzzer_PUI_AT-0927-TT-6-R | BZ1 |
| 2 | YAAJ_WeAct_BlackPill_Part_Like | YAAJ_WeAct_BlackPill_2 | BlackPill1, BlackPill_reversed1 |
| 2 | Conn_02x05_Odd_Even | PinHeader_2x05_P2.54mm_Vertical | PinsBottomA1, PinsBottomB1 |
| 3 | SW_Push | Kailh_socket_MX_optional_reversible | T1, T2, T3 |
Vonreg Bottom design files
The KiCad project lives in the tompi/vonreg repository on GitHub; these links point at the commit this page was built from.
- Layoutbottom/vonreg_bottom.kicad_pcb
- Schematicbottom/vonreg_bottom.kicad_sch
Vonreg Bottom: common questions
How big is the Vonreg Bottom PCB?
The Vonreg Bottom measures 68.6 × 83.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Vonreg Bottom?
9 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Vonreg Bottom design files?
From the tompi/vonreg repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Vonreg Bottom design in my own project?
The repository has no license, so all rights stay with tompi. Use it as a reference, and ask the author before reusing the design.
byrantech
google