AVRC-2560
TomPlano·AVRC-2560·kicad_proj/rc-duino.kicad_pcb
About the AVRC-2560 PCB
AVRC-2560 is an open source AVR/Arduino PCB design by TomPlano, published on GitHub. It is a 4-layer board measuring 101.6 × 54.6 mm, with 33 components from 20 distinct parts.
Its main chip is the ATMEGA2560-16AUR, from the AVR/Arduino family. Other key parts include the RCBus, 74HCT595D, SN74LVC1G374DCKR and 74HCT688. By type, the board carries 11 connectors, 11 capacitors, 5 ICs, 2 resistors, 1 crystal and 1 diode.
From the project
Project for interfacing Atmega2560 to the rcbus
Main components on the AVRC-2560
AVRC-2560 bill of materials (BOM)
33 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RCBus | RCBus | U1 |
| 1 | ATMEGA2560-16AUR | ATMEGA2560-16AUR | U2 |
| 1 | 74HCT595D | 74HCT595D | U3 |
| 1 | SN74LVC1G374DCKR | SN74LVC1G374DCKR | U4 |
| 1 | 74HCT688 | SOIC-20W_7.5x12.8mm_P1.27mm | U5 |
| 1 | 16Mhz Crystal | Crystal_HC49-U_Vertical | Y1 |
| 1 | Conn_01x03_Male | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x06_Male | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 3 | Conn_01x08_Male | IDC-Header_2x04_P2.54mm_Horizontal | J4, J5, J6 |
| 1 | proto_area_power_gnd | protoarea | J7 |
| 1 | Conn_02x03_Odd_Even | IDC-Header_2x03_P2.54mm_Horizontal | J8 |
| 1 | Conn_01x04_Male | IDC-Header_2x04_P2.54mm_Horizontal | J10 |
| 2 | Conn_01x02_Male | PinSocket_1x02_P2.54mm_Vertical | J13, J14 |
| 1 | C_Polarized | CP_Radial_D5.0mm_P2.00mm | 47uf1 |
| 1 | AVRC-Logo | avrc_2560 | H1 |
| 1 | D | D_1206_3216Metric | D1 |
| 9 | .1uf | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C4, C7, C8, C9, C11 +1 |
| 2 | 20pF | C_Disc_D4.7mm_W2.5mm_P5.00mm | C5, C6 |
| 2 | 10K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R4 |
AVRC-2560 design files
The KiCad project lives in the TomPlano/AVRC-2560 repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad_proj/rc-duino.kicad_pcb
- Schematickicad_proj/rc-duino.kicad_sch
AVRC-2560: common questions
What microcontroller does the AVRC-2560 use?
The AVRC-2560 is built around the ATMEGA2560-16AUR, from the AVR/Arduino family.
How big is the AVRC-2560 PCB?
The AVRC-2560 measures 101.6 × 54.6 mm, has 4 copper layers and is 4.69 mm thick.
How many components are on the AVRC-2560?
33 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the AVRC-2560 design files?
From the TomPlano/AVRC-2560 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the AVRC-2560 design in my own project?
The repository has no license, so all rights stay with TomPlano. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the AVRC-2560 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k