Tansi
toshok·tansi·kicad/teensy-ansi/teensy-ansi.kicad_pcb
About the Tansi PCB
Tansi is an open source NXP PCB design by toshok, published on GitHub. It is a 2-layer board measuring 102.5 × 147.1 mm, with 45 components from 10 distinct parts.
Its main chip is the Teensy4.1, from the NXP family. Other key parts include the 74FCT621ATSOG, SN75176BP and TXS0108EPW. By type, the board carries 33 resistors, 11 ICs and 1 connector.
From the project
toshok ansi disk emulator? teensy ansi emulator? for now it's both.
Main components on the Tansi
Tansi bill of materials (BOM)
45 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 74FCT621ATSOG | SOIC-20W_7.5x12.8mm_P1.27mm | IC1, IC2, IC3 |
| 4 | SN75176BP | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.71x3.4mm | IC4, IC5, IC6, IC7 |
| 1 | Teensy4.1 | Teensy41 | U1 |
| 3 | TXS0108EPW | TSSOP-20_4.4x6.5mm_P0.65mm | U2, U3, U4 |
| 1 | Conn_02x25_Odd_Even | IDC-Header_2x25_P2.54mm_Vertical | J1 |
| 7 | 220 / 5% | R_01005_0402Metric | R1, R3, R5, R7, R9, R11, R13 |
| 7 | 330 / %5 | R_01005_0402Metric | R2, R4, R6, R8, R10, R12, R14 |
| 1 | 10k / 10% | R_01005_0402Metric | R16 |
| 8 | 100 / 10% | R_01005_0402Metric | R17, R18, R19, R20, R21, R22, R23, R24 |
| 10 | 150 / 10% | R_01005_0402Metric | R25, R26, R27, R28, R29, R30, R31, R32 +2 |
Tansi design files
The KiCad project lives in the toshok/tansi repository on GitHub; these links point at the commit this page was built from.
Tansi: common questions
What microcontroller does the Tansi use?
The Tansi is built around the Teensy4.1, from the NXP family.
How big is the Tansi PCB?
The Tansi measures 102.5 × 147.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tansi?
45 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Tansi design files?
From the toshok/tansi repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Tansi design in my own project?
The repository has no license, so all rights stay with toshok. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Tansi without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
Similar boards
NXP
32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763NXP
Mega-Cube-Board
MaltWhiskey
200 × 54 mm100 parts4LNo license763NXP
MCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532NXP
MCL68
MicroCoreLabs
31.6 × 84.1 mm13 parts4LNo license532NXP
MCL65+
MicroCoreLabs
72.6 × 64.1 mm6 parts2LNo license532NXP
MCLZ8
MicroCoreLabs
37.1 × 61.5 mm6 parts4LNo license532