Powertrain
About the Powertrain PCB
Powertrain is an open source PCB design by ToyotaInfoTech, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 39.1 × 44.7 mm, with 16 components from 7 distinct parts.
By type, the board carries 6 resistors, 2 capacitors, 1 connector and 1 switch.
From the project
RAMN (Resistant Automotive Miniature Network), a miniature CAN/CAN-FD testbed of 4 Electronic Control Units.
Please see the docs 'Hardware' for more details.
The PCBWay re-orders in the docs are based on the design files in this repo at commit dca0831d852cdd53b45b3e2c7c4c0430066c91ad . When changes are made to the design files here and new orders need to be made, the following procedure should be followed to created updated versions of the files in orders/:
Install kikit and run the script makeorders.{bat|sh}` here from within KiCad 7.0 shell or KiCad 7.0 and follow the manual steps required printed to the console.
Powertrain bill of materials (BOM)
16 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SSQ-113-03-G-D Samtec Inc. | PinSocket_2x13_P2.54mm_Vertical | J6 |
| 1 | TestPoint | TestPoint_Loop_D2.54mm_Drill1.5mm_Beaded | 3V3 |
| 2 | PTA1543-2010CIB103 R_POT_TRIM_US Bourns | Potentiometer_Bourns_PTA1543_Single_Slide | RV1, RV2 |
| 1 | SKRHAAE010 SKRHADE010 Alps Alpine | SKRHADE010 | SW1 |
| 3 | SMF5V0TR D_TVS Rohm Semiconductor | D_SOD-123F | TVS1, TVS2, TVS3 |
| 2 | CL10B104KB8NNWC 100nF Samsung Electro-Mechanics | C_0603_1608Metric | C2, C3 |
| 6 | RMCF0603FT10K0 10k Stackpole Electronics Inc | R_0603_1608Metric | R1, R2, R3, R4, R5, R6 |
Powertrain design files
The KiCad project lives in the ToyotaInfoTech/RAMN repository on GitHub; these links point at the commit this page was built from.
Powertrain: common questions
How big is the Powertrain PCB?
The Powertrain measures 39.1 × 44.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Powertrain?
16 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Powertrain design files?
From the ToyotaInfoTech/RAMN repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Powertrain design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which ToyotaInfoTech chose for the repository.
More boards in RAMN
Pods panel
233.6 × 56.6 mm152 parts2LCC-BY-SA-4.0280
STM32Ramn
85.6 × 54 mm96 parts2LCC-BY-SA-4.0280
Debugger
34.6 × 49.8 mm21 parts2LCC-BY-SA-4.0280
Body
57.8 × 40.6 mm17 parts2LCC-BY-SA-4.0280
Chassis
39.1 × 31.7 mm13 parts2LCC-BY-SA-4.0280
Screens
34 × 46.9 mm5 parts2LCC-BY-SA-4.0280