ESP24V Ventilation LAB

Traxes·dimplex-zl400-esphome·hardware/emulator-lab-v2/kicad/ESP24V_Ventilation_LAB.kicad_pcb

ESP24V Ventilation LAB PCB layout, top view — open source board by Traxes

About the ESP24V Ventilation LAB PCB

ESP24V Ventilation LAB is an open source PCB design by Traxes, published on GitHub under the MIT license. It is a 2-layer board measuring 68 × 56 mm, with 24 components from 11 distinct parts.

By type, the board carries 12 resistors, 7 diodes, 4 connectors and 1 switch.

It belongs with the iot & wireless designs in this gallery.

From the project

ESPHome controller for Dimplex ZL 300/400 VF ventilation units – isolated 24 V I/O, XIAO ESP32-C6, KiCad PCB, 3D-printed case. | ESPHome-Steuerung für Dimplex-Lüftungsgeräte ZL 300/400 VF mit Home Assistant.

A drop-in replacement for the wall control panel (“Bedienelement Typ 1”) of Dimplex ZL 300 VF / ZL 400 VF home ventilation units. A Seeed XIAO ESP32-C6 reads the unit's five 24 V status outputs through optocouplers and “presses” the up/down buttons with optocoupler-driven PNP switches. In Home Assistant the unit shows up as a normal fan with three speeds.

- Galvanically isolated: the ESP is powered only by USB-C, nothing but optocouplers crosses to the unit's 24 V side. - Closed-loop control: every key press is verified through the unit's LED outputs; retries with back-off, fault entities…

ESP24V Ventilation LAB, from the project README
From the project README

ESP24V Ventilation LAB bill of materials (BOM)

24 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
24V_IN_from_supply
J1
1
24V_OUT_to_ESP
J2
1
AUS_0-4_to_ESP_optos
J3
1
EIN_0-1_from_ESP_relays
J4
1
SW_DIP_x05
SW1
5
1N4148W
GREEN
D1, D2, D3, D4, D5
1
C2297
RED
D6
1
1N4148W
RED
D7
5
10K
2.2k
R1, R2, R3, R4, R5
5
10K
10k
R6, R7, R8, R9, R10
2
330
10k
R11, R12

ESP24V Ventilation LAB design files

The KiCad project lives in the Traxes/dimplex-zl400-esphome repository on GitHub; these links point at the commit this page was built from.

ESP24V Ventilation LAB: common questions

How big is the ESP24V Ventilation LAB PCB?

The ESP24V Ventilation LAB measures 68 × 56 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP24V Ventilation LAB?

24 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ESP24V Ventilation LAB design files?

From the Traxes/dimplex-zl400-esphome repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ESP24V Ventilation LAB design in my own project?

Yes, under the terms of its MIT license, which Traxes chose for the repository.

More boards in dimplex-zl400-esphome

Similar boards