ESP24V HA XIAO
Traxes·dimplex-zl400-esphome·hardware/controller-v3/kicad/ESP24V_HA_XIAO.kicad_pcb
About the ESP24V HA XIAO PCB
ESP24V HA XIAO is an open source PCB design by Traxes, published on GitHub under the MIT license. It is a 2-layer board measuring 75 × 64 mm, with 43 components from 13 distinct parts.
Other key parts include the EL817S. By type, the board carries 21 resistors, 8 diodes, 7 ICs, 5 connectors and 2 transistors.
It belongs with the iot & wireless designs in this gallery.
From the project
ESPHome controller for Dimplex ZL 300/400 VF ventilation units – isolated 24 V I/O, XIAO ESP32-C6, KiCad PCB, 3D-printed case. | ESPHome-Steuerung für Dimplex-Lüftungsgeräte ZL 300/400 VF mit Home Assistant.
A drop-in replacement for the wall control panel (“Bedienelement Typ 1”) of Dimplex ZL 300 VF / ZL 400 VF home ventilation units. A Seeed XIAO ESP32-C6 reads the unit's five 24 V status outputs through optocouplers and “presses” the up/down buttons with optocoupler-driven PNP switches. In Home Assistant the unit shows up as a normal fan with three speeds.
- Galvanically isolated: the ESP is powered only by USB-C, nothing but optocouplers crosses to the unit's 24 V side. - Closed-loop control: every key press is verified through the unit's LED outputs; retries with back-off, fault entities…

Main components on the ESP24V HA XIAO
ESP24V HA XIAO bill of materials (BOM)
43 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | EL817S | SMDIP-4_W9.53mm | U1, U2, U3, U4, U5, U6, U7 |
| 2 | MMBT3906 | SOT-23 | Q1, Q2 |
| 1 | 24V_from_unit | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | AUS_0-4_unit_outputs | TerminalBlock_Phoenix_MKDS-1,5-5-5.08_1x05_P5.08mm_Horizontal | J2 |
| 1 | EIN_0-1_unit_inputs | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | XIAO_left_D0-D6 | PinSocket_1x07_P2.54mm_Vertical | J4 |
| 1 | XIAO_right_5V_GND_3V3_D10-D7 | PinSocket_1x07_P2.54mm_Vertical | J5 |
| 7 | 1N4148W | D_SOD-123 | D1, D2, D3, D4, D5, D7, D8 |
| 1 | C2297 GREEN | LED_0805_2012Metric | D6 |
| 14 | 10K 10k | R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8 +6 |
| 2 | 330 | R_0805_2012Metric | R11, R12 |
| 3 | 22K 22k | R_0805_2012Metric | R13, R14, R17 |
| 2 | 1k | R_0805_2012Metric | R20, R21 |
ESP24V HA XIAO design files
The KiCad project lives in the Traxes/dimplex-zl400-esphome repository on GitHub; these links point at the commit this page was built from.
ESP24V HA XIAO: common questions
How big is the ESP24V HA XIAO PCB?
The ESP24V HA XIAO measures 75 × 64 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP24V HA XIAO?
43 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP24V HA XIAO design files?
From the Traxes/dimplex-zl400-esphome repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP24V HA XIAO design in my own project?
Yes, under the terms of its MIT license, which Traxes chose for the repository.
More boards in dimplex-zl400-esphome
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kL0 USB
Luos-io
20.3 × 15.3 mm19 parts2LMIT547Breakout board
Luos-io
26.7 × 27.9 mm29 parts2LMIT547Stm32f0 disco Luos shield
Luos-io
55.9 × 99.1 mm26 parts2LMIT547L0 USBA
Luos-io
20.3 × 15.3 mm19 parts2LMIT547