Bike cadence sensor

Trevin-Small·bike_cadence_sensor·hardware/bike_cadence_meter.kicad_pcb

Bike cadence sensor PCB layout, top view — open source board by Trevin-Small

About the Bike cadence sensor PCB

Bike cadence sensor is an open source PCB design by Trevin-Small, published on GitHub. It is a 2-layer board measuring 43.5 × 29 mm, with 16 components from 11 distinct parts.

Other key parts include the C967633. By type, the board carries 5 resistors, 4 capacitors, 2 ICs, 2 connectors, 1 crystal and 1 switch.

It belongs with the sensors, audio and wearables designs in this gallery.

From the project

nrf52 based pedal cadence sensor

Uses a gyroscope to measure rotational velocity, and ANT+ to communicate data to a fitness watch.

Custom PCB, Zephyr RTOS, ANT+ Communication

Bike cadence sensor, from the project README
From the project README

Main components on the Bike cadence sensor

Bike cadence sensor bill of materials (BOM)

16 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
~
U1
1
C967633
LSM6DS3
U2
1
CM130_9PF_+-20PPM
CM130_9pf_+-20ppm
Y1
1
3034
J1
1
1X04
1x04
J2
1
C318884
SW_Push
SW1
1
C2286
LED
D1
2
C14663
100nF
C1, C2
2
C38523
12pF
C5, C6
4
C23162
4.7k
R1, R2, R3, R4
1
C22775
100
R5

Bike cadence sensor design files

The KiCad project lives in the Trevin-Small/bike_cadence_sensor repository on GitHub; these links point at the commit this page was built from.

Bike cadence sensor: common questions

How big is the Bike cadence sensor PCB?

The Bike cadence sensor measures 43.5 × 29 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Bike cadence sensor?

16 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Bike cadence sensor design files?

From the Trevin-Small/bike_cadence_sensor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Bike cadence sensor design in my own project?

The repository has no license, so all rights stay with Trevin-Small. Use it as a reference, and ask the author before reusing the design.

Similar boards