7 open source boards using the C967633

Real designs built with the C967633, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the C967633

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the C967633 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDIO pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 2.2 µF).
  • The VDD pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF.
  • The SCX pin has a pull-up to VCC on 6 of 7 designs, most often 1 kΩ (then 2.2 kΩ).
  • The SDX pin has a pull-up to VCC on 6 of 7 designs, most often 1 kΩ (then 2.2 kΩ).
SDOpin 1Connected to: GND 100%
VDDIOpin 5Connected to: VCC 86%
  • Decoupling capacitor on 100% · 100 nF (9), 2.2 µF (3)
GNDIOpin 6Connected to: GND 100%
GNDpin 7Connected to: GND 100%
VDDpin 8Connected to: VCC 86%
  • Decoupling capacitor on 100% · 100 nF (9)
INT2pin 9Connected to: Not connected 86%
OCSBpin 10Connected to: Not connected 100%
OSDOpin 11Connected to: Not connected 100%
CSBpin 12Connected to: VCC 71% · a signal 29%
SCXpin 13Connected to: C15742 43%, BQ25713RSNR 29%, C22394458 29%
  • Pull-up to VCC on 86% · 1 kΩ (3), 2.2 kΩ (2), 4.7 kΩ (1)
  • Series resistor on 43% · 100 Ω (2)
SDXpin 14Connected to: C15742 43%, BQ25713RSNR 29%, C22394458 29%
  • Pull-up to VCC on 86% · 1 kΩ (3), 2.2 kΩ (2), 4.7 kΩ (1)
  • Series resistor on 43% · 100 Ω (2)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RobotDriver by BerkeleyHCI, VESC6 OPEN HARDWARE by craigg96, VESC6 OPEN HARDWARE by duwogus7650-ctrl and VESC6 OPEN HARDWARE by duwogus7650-ctrl.

The C967633 in open source designs

The gallery holds 7 open source boards using the C967633 from 7 GitHub repositories; a typical one measures about 110 × 45 mm and carries around 118 components.

71% use four copper layers or more, and 29% carry an open source license.

The most starred is RobotDriver by BerkeleyHCI.

Microcontrollers on boards using the C967633

C967633: common questions

Where can I find a C967633 reference design?

Each of the 7 boards on this page is a real design using the C967633. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the C967633 VDDIO pin?

The VDDIO pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 7 open source designs using the C967633.

What decoupling capacitors do designs use on the C967633 VDD pin?

The VDD pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the C967633.

What pull-up resistor is used on the C967633 SCX pin?

The SCX pin has a pull-up to VCC on 6 of 7 designs, most often 1 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 7 open source designs using the C967633.

What parts are used alongside the C967633?

The C124020, C15742, C477918, C495342 and C98969 appear in the most repositories here.

Which microcontrollers do boards using the C967633 use?

Most are built on ESP32 (3) and STM32 (3).

How big is a typical board using the C967633?

The median is 110 × 45 mm, and 29% are two-layer designs.

What is the most popular open source board using the C967633?

By GitHub stars, RobotDriver by BerkeleyHCI, with 91 stars.

Can I simulate one of these boards using the C967633 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part