Kicad avr programmer
trombik·kicad-avr-programmer·kicad/avr-programmer.kicad_pcb
About the Kicad avr programmer PCB
Kicad avr programmer is an open source AVR/Arduino PCB design by trombik, published on GitHub under the BSD-2-Clause license. It is a 2-layer board measuring 70.4 × 54.6 mm, with 13 components from 9 distinct parts.
Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. By type, the board carries 3 diodes, 3 capacitors, 3 resistors, 2 connectors, 1 module and 1 crystal.
It belongs with the usb & debug tools designs in this gallery.
From the project
AVR programmer based on ArduinoISP.ino from Arduino examples
An AVR programmer for 8 pin DIP ATtiny chips and for 28 pin ATMega chips, based on "Arduino as ISP" example from Arduino.
The programmer can be built on a 50mm x 70mm universal board.
The programmer can upload code (or set fuse) to:
ATtiny DIP-8N chips, such as ATtiny85 and ATtiny13 ATMega DIP-28N chips, such as ATmega328p
For ATmega328p, a crystal and capacitors provides external clocks to the MCU.
Main components on the Kicad avr programmer
Kicad avr programmer bill of materials (BOM)
13 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Arduino_Nano_v3.x | Arduino_Nano | A1 |
| 1 | Crystal 16Mhz | Crystal_HC18-U_Vertical | Y1 |
| 1 | Conn_02x14_Counter_Clockwise | DIP_Socket-28_W6.9_W7.62_W10.16_W12.7_W13.5_3M_228-4817-00-0602J | J1 |
| 1 | Conn_02x04_Counter_Clockwise | DIP_Socket-14_W4.3_W5.08_W7.62_W10.16_W10.9_3M_214-3339-00-0602J | J2 |
| 3 | LED | LED_D3.0mm | D1, D2, D3 |
| 1 | 10uF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C1 |
| 2 | 22pF | C_Disc_D4.7mm_W2.5mm_P5.00mm | C2, C3 |
| 1 | 270 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |
| 2 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2, R3 |
Kicad avr programmer design files
The KiCad project lives in the trombik/kicad-avr-programmer repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/avr-programmer.kicad_pcb
- Schematickicad/avr-programmer.kicad_sch
Kicad avr programmer: common questions
What microcontroller does the Kicad avr programmer use?
The Kicad avr programmer is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.
How big is the Kicad avr programmer PCB?
The Kicad avr programmer measures 70.4 × 54.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kicad avr programmer?
13 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kicad avr programmer design files?
From the trombik/kicad-avr-programmer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Kicad avr programmer design in my own project?
Yes, under the terms of its BSD-2-Clause license, which trombik chose for the repository.
Can I test firmware for the Kicad avr programmer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k