USB-Monostable
tti0·USB-Monostable
About the USB-Monostable PCB
USB-Monostable is an open source PCB design by tti0, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 60 × 20 mm, with 15 components from 14 distinct parts.
Other key parts include the SIP32508DT-T1-GE3 and NE555D. By type, the board carries 4 capacitors, 4 resistors, 2 ICs, 2 connectors, 2 switches and 1 diode.
From the project
An in-line timer/monostable switch for USB power
- An in-line timer/monostable switch for 5 V USB power, with a PCB based around the 555 timer and SiP32508 load switch ICs.
- Pressing the "On" button causes the switch between the input and output USB power lines to close, reopening after a customisable and fixed time period has elapsed. - Pressing the "Reset" button causes the switch to immediately open. - Optional indicator LED reflects the switch status. - USB data lines are not passed through. - Current draw when the switch is open is under than 1 mA at 5 V. - Slim physical footprint (20 x 60 mm) allows the switch to be placed in-line…

Main components on the USB-Monostable
USB-Monostable bill of materials (BOM)
15 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SIP32508DT-T1-GE3 | SOT-23-6 | IC1 |
| 1 | NE555D | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | USB_A (Input, male) | USB1061GFLA | J1 |
| 1 | USB_A (Output, female) | USBASRA | J2 |
| 1 | SW_Push (Set) | SW_PUSH_6mm | SW1 |
| 1 | SW_Push (Reset) | SW_PUSH_6mm | SW2 |
| 1 | LED | LED_0805_2012Metric | D1 |
| 1 | 10 nF | C_0805_2012Metric | C1 |
| 1 | 10 uF | C_0805_2012Metric | C2 |
| 1 | 100 nF | C_0805_2012Metric | C3 |
| 1 | 4.7 uF | C_0805_2012Metric | C4 |
| 2 | 10k | R_0805_2012Metric | R1, R3 |
| 1 | 5M6 | R_0805_2012Metric | R2 |
| 1 | 220 | R_0805_2012Metric | R4 |
USB-Monostable design files
The KiCad project lives in the tti0/USB-Monostable repository on GitHub; these links point at the commit this page was built from.
USB-Monostable: common questions
How big is the USB-Monostable PCB?
The USB-Monostable measures 60 × 20 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USB-Monostable?
15 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the USB-Monostable design files?
From the tti0/USB-Monostable repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the USB-Monostable design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which tti0 chose for the repository.