Tripi-7segment
tunaerray·tripi-7segment·pcb/muhtas1.kicad_pcb
About the Tripi-7segment PCB
Tripi-7segment is an open source PCB design by tunaerray, published on GitHub under the MIT license. It is a 2-layer board measuring 94.3 × 83 mm, with 40 components from 11 distinct parts.
Other key parts include the CA56-12SEKWA. By type, the board carries 23 resistors, 8 transistors, 4 switches, 2 ICs, 1 connector and 1 diode.
It belongs with the displays & leds designs in this gallery.
From the project
8x seven-segment display peripheral board for the TRIPI (Trion-based FPGA) platform with buttons, switches and reset
A peripheral expansion board designed for the TRIPI (Trion-based FPGA) platform, featuring 8 seven-segment displays, external push buttons, switches, and a reset mechanism.
This project provides a ready-to-use hardware module for FPGA-based digital logic and display control applications. The board connects directly to the 40-pin GPIO header of the TRIPI FPGA board, enabling students and developers to implement and test digital systems without additional wiring or breadboarding.

Main components on the Tripi-7segment
Tripi-7segment bill of materials (BOM)
40 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CA56-12SEKWA | CA56-12SEKWA | U1, U3 |
| 8 | MMBTA56 | SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q10 |
| 1 | Conn_02x20_Odd_Even | PinSocket_2x20_P2.54mm_Vertical | J2 |
| 1 | SW_DIP_x01 | SW_DIP_SPSTx01_Slide_6.7x4.1mm_W8.61mm_P2.54mm_LowProfile | SW1 |
| 2 | SW_Push | SW_Push_1P1T_NO_E-Switch_TL3301NxxxxxG | SW2, SW3 |
| 1 | SW_DIP_x03 | SW_DIP_SPSTx03_Slide_6.7x9.18mm_W8.61mm_P2.54mm_LowProfile | SW4 |
| 1 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 9 | 2.2kR | R_1206_3216Metric | R1, R2, R3, R4, R5, R6, R7, R8 +1 |
| 8 | 330R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9, R15, R16, R17, R18, R19, R20, R21 |
| 6 | 10K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11, R12, R13, R14, R22, R23 |
Tripi-7segment design files
The KiCad project lives in the tunaerray/tripi-7segment repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/muhtas1.kicad_pcb
- Schematicpcb/muhtas1.kicad_sch
Tripi-7segment: common questions
How big is the Tripi-7segment PCB?
The Tripi-7segment measures 94.3 × 83 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tripi-7segment?
40 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Tripi-7segment design files?
From the tunaerray/tripi-7segment repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Tripi-7segment design in my own project?
Yes, under the terms of its MIT license, which tunaerray chose for the repository.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k