LedDeska
TVavrinec·AHS-Automaticke_Herni_Stanoviste·hw/ZakladniElektronika/jlcout/build/LedDeska.kicad_pcb
About the LedDeska PCB
LedDeska is an open source PCB design by TVavrinec, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 254 components from 8 distinct parts.
Other key parts include the LDC1614. By type, the board carries 128 capacitors, 120 diodes, 4 inductors, 1 IC and 1 connector.
From the project
Elektronika je rozdělena na dvě desky, Led dsku a Hlavní desku.
Elektronika je rozdělena na dvě desky, Led dsku a Hlavní desku.
Oproti předchozím verzím je přidán LED-kruh i na druhou stranu LedDesky abychom se zbavili LED-pásku a odebrat výstupní konektor - Přední axiální LEDkoví kruh z 60ti RGB LEDek - Zadní radiální LEDkoví kruh z 60ti RGB LEDek (buď přímo radiální [buce cca třikrát dražší] nebo axiální s odraznou plochou [radializátorem]) - LDC1614 nebo LDC1314 + čtyři snímací cívky pro snímání tlakové plochy

Main components on the LedDeska
LedDeska bill of materials (BOM)
254 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LDC1614 | WQFN-16-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | Conn_01x40 | AFC11-S40ICC-00 | J10 |
| 120 | WS2812B | 3528RGBW-WS2812B | D1, D2, D3, D4, D5, D6, D7, D8 +112 |
| 4 | 5.738 µH | PCB_coil | L1, L2, L3, L4 |
| 2 | 10u | C_0603_1608Metric | C1, C2 |
| 1 | 1u | C_0402_1005Metric | C3 |
| 121 | 100n | C_0402_1005Metric | C4, C12, C13, C14, C15, C16, C17, C18 +113 |
| 4 | 1000p | C_0402_1005Metric | C8, C9, C10, C11 |
LedDeska design files
The KiCad project lives in the TVavrinec/AHS-Automaticke_Herni_Stanoviste repository on GitHub; these links point at the commit this page was built from.
LedDeska: common questions
How big is the LedDeska PCB?
The LedDeska measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LedDeska?
254 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the LedDeska design files?
From the TVavrinec/AHS-Automaticke_Herni_Stanoviste repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the LedDeska design in my own project?
The repository has no license, so all rights stay with TVavrinec. Use it as a reference, and ask the author before reusing the design.