HlavniDeska

TVavrinec·AHS-Automaticke_Herni_Stanoviste·hw/ZakladniElektronika/jlcout/build/HlavniDeska.kicad_pcb

HlavniDeska PCB layout, top view — open source ESP32 board by TVavrinec

About the HlavniDeska PCB

HlavniDeska is an open source ESP32 PCB design by TVavrinec, published on GitHub. It is a 4-layer board measuring 100 × 70.2 mm, with 123 components from 57 distinct parts.

Its main chip is the ESP32-S3-WROOM, from the ESP32 family. Other key parts include the BL1530TQFN, BQ25895M, TPD4E02B04DQA, WSD20L75DN33 and NCP708. By type, the board carries 47 resistors, 30 capacitors, 13 ICs, 9 transistors, 6 connectors and 5 switches.

It belongs with the power & battery designs in this gallery.

From the project

Elektronika je rozdělena na dvě desky, Led dsku a Hlavní desku.

Elektronika je rozdělena na dvě desky, Led dsku a Hlavní desku.

Oproti předchozím verzím je přidán LED-kruh i na druhou stranu LedDesky abychom se zbavili LED-pásku a odebrat výstupní konektor - Přední axiální LEDkoví kruh z 60ti RGB LEDek - Zadní radiální LEDkoví kruh z 60ti RGB LEDek (buď přímo radiální [buce cca třikrát dražší] nebo axiální s odraznou plochou [radializátorem]) - LDC1614 nebo LDC1314 + čtyři snímací cívky pro snímání tlakové plochy

HlavniDeska, from the project README
From the project README

Main components on the HlavniDeska

BL1530TQFNBQ25895MTPD4E02B04DQAWSD20L75DN33NCP708ESP32-S3-WROOMSL8261D-G3JEBateriCell_2xTPS61088RHLR

HlavniDeska bill of materials (BOM)

123 components, 57 distinct parts.

QtyPartRefs
1
BL1530TQFN
U2
1
BQ25895M
U3
2
TPD4E02B04DQA
U5, U13
4
WSD20L75DN33
U7, U8, U9, U15
1
NCP708
U10
1
ESP32-S3-WROOM
U11
1
SL8261D-G3JE
U12
1
BateriCell_2x
U14
1
TPS61088RHLR
U16
9
NMOS
Q1, Q2, Q4, Q5, Q6, Q7, Q8, Q9 +1
1
Conn_02x09_Counter_Clockwise
J1
1
USB_C_Receptacle_USB2.0
J2
1
Conn_01x07
J4
1
Micro_SD_Card
J5
1
ESP-Programing_conector
J7
1
Conn_01x40
J11
1
HlavniDeska
B1
1
Buzzer
BZ1
2
3A-6A
F1, F2
2
SW_Push
SW1, SW2
Show 37 more
QtyPartRefs
1
ON
SW3
1
BOOT
SW4
1
EN
SW5
2
TestPoint-5V_A
TP1, TP11
1
TestPoint-5V_EN
TP8
1
TestPoint-5V
TP9
1
TestPoint-5V_B
TP10
1
D_Dual_CommonCathode_AAK_Parallel
D122
1
LED_ARGB
D125
1
1.2u
L5
1
0.47u
L6
4
1u
C5, C132, C133, C149
1
47n
C6
3
4.7u
C7, C145, C155
7
10u
C134, C143, C152, C159, C160, C161, C162
4
100n
C135, C144, C146, C148
2
10uF
C136, C137
6
22u
C142, C147, C151, C153, C154, C156
1
47n
C150
1
10n
C157
1
100p
C158
17
10k
R1, R2, R6, R7, R8, R9, R10, R12 +9
2
5.1k
R3, R4
3
1k
R5, R11, R28
2
330
R14, R15
1
150
R19
1
56k
R20
2
100k
R21, R40
1
470
R26
4
200
R29, R30, R49, R52
1
2k
R34
5
4.7k
R37, R38, R39, R45, R48
2
200k
R47, R53
2
17.4k
R50, R58
2
150k
R54, R55
1
3.92k
R56
1
56k
R57

HlavniDeska design files

The KiCad project lives in the TVavrinec/AHS-Automaticke_Herni_Stanoviste repository on GitHub; these links point at the commit this page was built from.

HlavniDeska: common questions

What microcontroller does the HlavniDeska use?

The HlavniDeska is built around the ESP32-S3-WROOM, from the ESP32 family.

How big is the HlavniDeska PCB?

The HlavniDeska measures 100 × 70.2 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the HlavniDeska?

123 components, from 57 distinct parts. The full bill of materials is listed on this page.

Where can I download the HlavniDeska design files?

From the TVavrinec/AHS-Automaticke_Herni_Stanoviste repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the HlavniDeska design in my own project?

The repository has no license, so all rights stay with TVavrinec. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the HlavniDeska without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in AHS-Automaticke_Herni_Stanoviste

Similar boards