Macropod v3

tyrobee·Macropod-v3·PCB/MAcropad v3.kicad_pcb

Macropod v3 PCB layout, top view — open source board by tyrobee

About the Macropod v3 PCB

Macropod v3 is an open source PCB design by tyrobee, published on GitHub. It is a 2-layer board measuring 65 × 45 mm, with 6 components from 4 distinct parts.

Other key parts include the MOUDLE-SEEEDUINO-XIAO. By type, the board carries 4 switches, 1 IC and 1 connector.

It belongs with the keyboards designs in this gallery.

From the project

A macropad based off sayo device design

I made a hackboard based on the pretty well known Sayo Device.

My Hackboard has a rotary encoder for volume control, 3 keys for macros/inputs. Currently in the QMK firmware it's been coded so the left key will press W on the keyboard, the middle key will do copy, and the right key will do paste. To make this Hackboard yourself you will need all the electronics in BOM plus get the custom PCB board made, the files for that are in gerbers in the production folder. After that you will need to 3d print all 3 of the parts for the case. Next you assemble the PCB board by sautering all of the pieces…

Macropod v3, from the project README
From the project README

Main components on the Macropod v3

Macropod v3 bill of materials (BOM)

6 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MOUDLE-SEEEDUINO-XIAO
U1
1
CONN_01X04_SOCKET
Conn_01x04_Socket
J1
3
SW_Push
SW1, SW2, SW3
1
RotaryEncoder_Switch
SW4

Macropod v3 design files

The KiCad project lives in the tyrobee/Macropod-v3 repository on GitHub; these links point at the commit this page was built from.

Macropod v3: common questions

How big is the Macropod v3 PCB?

The Macropod v3 measures 65 × 45 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Macropod v3?

6 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Macropod v3 design files?

From the tyrobee/Macropod-v3 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Macropod v3 design in my own project?

The repository has no license, so all rights stay with tyrobee. Use it as a reference, and ask the author before reusing the design.

Similar boards