Flaps and Speed Display HW

ubx·Flaps_and_Speed_Display_HW

Flaps and Speed Display HW PCB layout, top view — open source board by ubx

About the Flaps and Speed Display HW PCB

Flaps and Speed Display HW is an open source PCB design by ubx, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 46 × 46 mm, with 7 components from 6 distinct parts.

Other key parts include the SN65HVD230DR. By type, the board carries 3 capacitors, 2 resistors, 1 IC and 1 inductor.

It belongs with the displays & leds and sensors designs in this gallery.

From the project

A KiCad project for a hardware module designed to interface with flap and speed sensors

A KiCad project for a hardware module designed to interface with flap and speed sensors, likely for aviation or automotive applications.

This hardware module is designed to run the following software: Flaps and Speed Display

Main components on the Flaps and Speed Display HW

Flaps and Speed Display HW bill of materials (BOM)

7 components, 6 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	SN65HVD230DR SN65HVD230 Texas Instruments	SOIC-8_3.9x4.9mm_P1.27mm	U1
1	ACT1210-220-2P-TL00 TDK	ACT1210_TDK	L1
1	GRM31CR71H104KA01L 100nF Murata	R_1206_3216Metric_Pad1.30x1.75mm_HandSolder	C1
2	GRM31C5C1H101JA01L 100pF Murata	R_1206_3216Metric_Pad1.30x1.75mm_HandSolder	C2, C3
1	RC1206FR-0710KL 10K Yageo	R_1206_3216Metric_Pad1.30x1.75mm_HandSolder	R1
1	RC1206FR-07120RL 120 Yageo	R_1206_3216Metric_Pad1.30x1.75mm_HandSolder	R2

Flaps and Speed Display HW design files

The KiCad project lives in the ubx/Flaps_and_Speed_Display_HW repository on GitHub; these links point at the commit this page was built from.

Flaps and Speed Display HW: common questions

How big is the Flaps and Speed Display HW PCB?

The Flaps and Speed Display HW measures 46 × 46 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Flaps and Speed Display HW?

7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Flaps and Speed Display HW design files?

From the ubx/Flaps_and_Speed_Display_HW repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Flaps and Speed Display HW design in my own project?

Yes, under the terms of its GPL-3.0 license, which ubx chose for the repository.

Similar boards