Hybrid25 RIU
UC-Aerospace·Hybrid25_RIU·v1/RIU .kicad_pcb
About the Hybrid25 RIU PCB
Hybrid25 RIU is an open source STM32 PCB design by UC-Aerospace, published on GitHub. It is a 4-layer board measuring 86.2 × 101 mm, with 126 components from 24 distinct parts.
Its main chip is the STM32G0B1RCT6, from the STM32 family. Other key parts include the MCP23008-xP, AZ1117CH-5.0TRG1 and AZ1117CH-3.3TRG1. By type, the board carries 61 resistors, 39 connectors, 15 capacitors, 7 ICs, 2 fuses and 1 switch.
Main components on the Hybrid25 RIU
Hybrid25 RIU bill of materials (BOM)
126 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | MCP23008-xP | DIP-18_W7.62mm | U2, U4, U6, U7 |
| 1 | AZ1117CH-5.0TRG1 AZ1117C-5.0 | SOT-223-3_TabPin2 | U5 |
| 1 | STM32G0B1RCT6 STM32G0B1RCTx | LQFP-64_10x10mm_P0.5mm | U8 |
| 1 | AZ1117CH-3.3TRG1 AZ1117C-3.3 | SOT-223-3_TabPin2 | U9 |
| 1 | Micro_SD_Card | microSD_HC_Molex_47219-2001 | J1 |
| 1 | 2S IN | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2 |
| 2 | Conn_01x04 | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J3, J13 |
| 32 | Conn_01x02 | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J4, J5, J7, J8, J9, J10, J11, J12 +24 |
| 1 | Conn_01x06 | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J6 |
| 1 | 10118193-0001LF USB_B_Micro | USB_Micro-B_Amphenol_10118193-0001LF_Horizontal | J14 |
| 1 | B4B-PH-K-S SWD JST PH | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J15 |
| 1 | ST490ABDR | SO-8_3.9x4.9mm_P1.27mm | CR1 |
| 2 | 200m | Fuse_1206_3216Metric | F1, F2 |
| 1 | SW_Push | SW_PUSH_6mm | SW2 |
| 11 | 10u | C_0603_1608Metric | C1, C2, C3, C4, C5, C8, C9, C10 +3 |
| 1 | 100n | C_0603_1608Metric | C6 |
| 1 | 4u7 | C_0603_1608Metric | C7 |
| 2 | 22u | C_1206_3216Metric | C16, C18 |
| 16 | 200R | R_0603_1608Metric | R6, R7, R8, R9, R10, R11, R12, R13 +8 |
| 2 | 27R | R_0603_1608Metric | R22, R23 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100R | R_0603_1608Metric | R24 |
| 16 | 40k | R_0603_1608Metric | R27, R28, R29, R30, R31, R32, R33, R34 +8 |
| 22 | 10k | R_0603_1608Metric | R51, R52, R53, R54, R55, R56, R57, R58 +14 |
| 4 | 20k | R_0603_1608Metric | R64, R65, R66, R67 |
Hybrid25 RIU design files
The KiCad project lives in the UC-Aerospace/Hybrid25_RIU repository on GitHub; these links point at the commit this page was built from.
- Layoutv1/RIU .kicad_pcb
- Schematicv1/RIU .kicad_sch
Hybrid25 RIU: common questions
What microcontroller does the Hybrid25 RIU use?
The Hybrid25 RIU is built around the STM32G0B1RCT6, from the STM32 family.
How big is the Hybrid25 RIU PCB?
The Hybrid25 RIU measures 86.2 × 101 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Hybrid25 RIU?
126 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hybrid25 RIU design files?
From the UC-Aerospace/Hybrid25_RIU repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Hybrid25 RIU design in my own project?
The repository has no license, so all rights stay with UC-Aerospace. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Hybrid25 RIU without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k