9 open source boards using the MCP23008-xP

Real designs built with the MCP23008-xP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the MCP23008-xP

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the MCP23008-xP connects to, and the resistors, capacitors and other passives placed on it.

  • The A1 pin is tied to GND on 9 of 9 designs.
  • The A2 pin is tied to GND on 8 of 9 designs.
  • The A0 pin is tied to GND on 8 of 9 designs.
  • The RESET pin is tied to 3.3V on 7 of 9 designs (a signal on 2).
SCLpin 1Connected to: A connector 33%, the microcontroller 33%, DEV-16771 22%
  • Pull-up to 3.3V on 44% · 4.7 kΩ (2), 10 kΩ (1), 680 Ω (1)
SDApin 2Connected to: A connector 33%, the microcontroller 33%, DEV-16771 22%
  • Pull-up to 3.3V on 44% · 4.7 kΩ (2), 10 kΩ (1), 680 Ω (1)
A2pin 3Connected to: GND 89%
A1pin 4Connected to: GND 100%
A0pin 5Connected to: GND 89%
RESETpin 6Connected to: 3.3V 78% · a signal 22%
NCpin 7Connected to: Not connected 100%
INTpin 8Connected to: Not connected 78% · a signal 22%
VSSpin 9Connected to: GND 100%
GP7pin 17Connected to: Not connected 56% · a signal 44%
  • Series resistor on 33% · 100 Ω (3)
VDDpin 18Connected to: 3.3V 100%

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TeensyMaestro Main by DRWJSCHMIDT, AcCCS by IdahoLabResearch, TeensyMaestro Main by rimuadmin and SmartRV-AIO-THT by RoBro92.

The MCP23008-xP in open source designs

The gallery holds 9 open source boards using the MCP23008-xP from 9 GitHub repositories; a typical one measures about 172.1 × 121.2 mm and carries around 100 components.

89% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.

The most starred is TeensyMaestro Main by DRWJSCHMIDT.

Parts used alongside the MCP23008-xP

Microcontrollers on boards using the MCP23008-xP

MCP23008-xP: common questions

Where can I find a MCP23008-xP reference design?

Each of the 9 boards on this page is a real design using the MCP23008-xP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MCP23008-xP A1 pin connected?

The A1 pin is tied to GND on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the MCP23008-xP.

How is the MCP23008-xP A2 pin connected?

The A2 pin is tied to GND on 8 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the MCP23008-xP.

How is the MCP23008-xP A0 pin connected?

The A0 pin is tied to GND on 8 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the MCP23008-xP.

What parts are used alongside the MCP23008-xP?

The DEV-16771, LTV-817 and MCP23017-E/SP appear in the most repositories here.

Which microcontrollers do boards using the MCP23008-xP use?

Most are built on RP2040/RP2350 (2), ESP32 (1) and STM32 (1).

How big is a typical board using the MCP23008-xP?

The median is 172.1 × 121.2 mm, and 89% are two-layer designs.

What is the most popular open source board using the MCP23008-xP?

By GitHub stars, TeensyMaestro Main by DRWJSCHMIDT, with 18 stars.

Can I simulate one of these boards using the MCP23008-xP before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part