Info card

udu3324·info-card·pcb/infocard/infocard.kicad_pcb

Info card PCB layout, top view — open source board by udu3324

About the Info card PCB

Info card is an open source PCB design by udu3324, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 85.6 × 54 mm, with 5 components from 5 distinct parts.

Other key parts include the NT3H2111W0FHKH. By type, the board carries 1 IC, 1 antenna, 1 diode, 1 capacitor and 1 resistor.

From the project

a pcb with some info on it

A pcb in the shape of a standard size credit card with nft reading/writing capabilities, contact information, and useful references on the back. It is fully designed in KiCad instead of EasyEDA with symbols/footprints sourced from Ultralibrarian.

I wanted to take a notch down on all the highly complicated PCBs I've made and create something more artsy. I gained more experience from using Krita with its keybinds and workflow.

Info card, from the project README
From the project README

Main components on the Info card

Info card bill of materials (BOM)

5 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
NT3H2111W0FHKH
JLCPCB
U1
1
Antenna_Loop
AE1
1
KT-0805G
LED
JLCPCB
D1
1
CL21B224KBFNNNE
220nF
JLCPCB
C1
1
0805W8F470JT5E
47Ω
JLCPCB
R1

Info card design files

The KiCad project lives in the udu3324/info-card repository on GitHub; these links point at the commit this page was built from.

Info card: common questions

How big is the Info card PCB?

The Info card measures 85.6 × 54 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Info card?

5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Info card design files?

From the udu3324/info-card repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Info card design in my own project?

Yes, under the terms of its GPL-3.0 license, which udu3324 chose for the repository.