Elicio

uguryildirim24·elicio·hardware/board/elicio-v4.kicad_pcb

Elicio PCB layout, top view — open source board by uguryildirim24

About the Elicio PCB

Elicio is an open source PCB design by uguryildirim24, published on GitHub under the MIT license. It is a 2-layer board measuring 31.2 × 55.2 mm, with 63 components from 27 distinct parts.

Other key parts include the ISP1807-LR-RS, ADS1292IRSMT, BQ25100YFPR, TLV71330PDQNR and TPS7A0230PDQNR. By type, the board carries 30 resistors, 19 capacitors, 5 ICs, 4 transistors, 2 connectors and 2 diodes.

It belongs with the audio and wearables designs in this gallery, and the repository also holds 1 earlier revision of it.

From the project

Unfinished ear-muscle EMG earpiece research with KiCad board designs, parametric shell CAD, firmware, synthetic transport fixtures and an audited gesture-to-action gate.

Elicio is an unfinished ear-muscle EMG earpiece that is intended to turn a deliberate contraction into a gated event before an AI acts.

Rolf chose a discreet physical input rather than an always-active command channel. The sensor should propose an event. Policy should decide whether that event can act. Sensing, permission and execution remain separate.

The board is not finished, has not been ordered and is unmeasured. No physical earpiece, real ear-muscle recording or end-to-end biological action has been validated. The runnable demonstrations use synthetic input. Only a harmless local file…

Elicio, from the project README
From the project README

Main components on the Elicio

ISP1807-LR-RSADS1292IRSMTBQ25100YFPRTLV71330PDQNRTPS7A0230PDQNR

Elicio bill of materials (BOM)

63 components, 27 distinct parts.

QtyPartRefs
1
ISP1807-LR-RS
ISP1807-LR
U1
1
ADS1292IRSMT
U2
1
BQ25100YFPR
U3
1
TLV71330PDQNR
U4
1
TPS7A0230PDQNR
U5
1
WPM3027-3/TR
WPM3027-3
Q1
3
PMZ290UNE2YL
PMZ290UNE2
Q2, Q3, Q4
1
202656-0021
J2
1
HDR-3-RA
J3
1
1TS015A-1200-0600-CT
1TS015A
SW1
1
PESD5V0L1UL
D1
1
LTST-C281TGKT-5A
LED-0402
D2
1
0201B152K500NT
1.5nF
C1
1
TCC0201X7R103K500ZT
10nF
C2
4
GRM155R61A106ME18D
10uF
C3, C14, C18, C19
6
TCC0201X5R105K6R3ZT
1uF
C4, C5, C10, C11, C13, C16
3
CL05A106MQ5NUNC
10uF
C6, C8, C9
4
CL03A104KO3NNNC
100nF
C7, C12, C15, C17
6
220k
R1, R2, R3, R31, R32, R33
4
0201WMF1004TEE
1M
R4, R17, R20, R21
Show 7 more
QtyPartRefs
10
0201WMF1002TEE
10k
R5, R6, R7, R8, R13, R25, R27, R28 +2
1
0201WMF6801TEE
6.8k
R11
1
0201WMF6041TEE
6.04k
R12
5
0201WMF1003TEE
100k
R14, R15, R16, R23, R24
1
47k
R18
1
27k
R19
1
0201WMF1001TEE
1k
R22

Elicio design files

The KiCad project lives in the uguryildirim24/elicio repository on GitHub; these links point at the commit this page was built from.

Elicio: common questions

How big is the Elicio PCB?

The Elicio measures 31.2 × 55.2 mm, has 2 copper layers and is 0.11 mm thick.

How many components are on the Elicio?

63 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the Elicio design files?

From the uguryildirim24/elicio repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Elicio design in my own project?

Yes, under the terms of its MIT license, which uguryildirim24 chose for the repository.

Earlier revisions in the repo: elicio-v2

Similar boards