12 open source boards using the ISP1807-LR-RS

Real designs built with the ISP1807-LR-RS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the ISP1807-LR-RS

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the ISP1807-LR-RS connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT_ANT pin is left unconnected on 9 of 9 designs.
  • The OUT_MOD pin is left unconnected on 9 of 9 designs.
  • The P0_07_TRACECLK pin is left unconnected on 8 of 8 designs.
  • The P1_10 pin is left unconnected on 6 of 6 designs.
VSSpin 1, 7, 14, 16, 18, 21, 23, 24, 25, 31Connected to: GND 100%
P0_09_NFC1pin 2Connected to: Not connected 50% · a signal 50%
  • Series resistor on 50% · 180 Ω (2)
P0_12_TRACEDATA1pin 3Connected to: Not connected 71% · a signal 29%
P0_10_NFC2pin 4Connected to: Signal 71% · not connected 29%
  • Series resistor on 57% · 50 Ω (2)
P0_14pin 5Connected to: Not connected 71% · a signal 29%
P0_16pin 9Connected to: Not connected 71% · a signal 29%
P0_21pin 11Connected to: Not connected 71% · a signal 29%
VBUSpin 12Connected to: VBUS 67% · not connected 33%
P0_18_RESETpin 13Connected to: A connector 67%
  • Pull-up to 3.3V on 33% · 100 kΩ (2), 10 kΩ (1)
P0_20pin 15Connected to: Not connected 63% · a signal 38%
P0_24pin 19Connected to: Not connected 63% · GND 38%
OUT_ANTpin 20Connected to: Not connected 100%
OUT_MODpin 22Connected to: Not connected 100%
VCC_NRFpin 26Connected to: VDD 89%
  • Decoupling capacitor on 33% · 100 nF (2), 10 µF (1)
P0_17pin 27Connected to: Not connected 63% · a signal 38%
P0_13pin 29Connected to: Not connected 71% · a signal 29%
P0_08pin 32Connected to: MAX17048G+T10 22%, MC3419 22% · not connected 22%
  • Pull-up to 3.3V on 33% · 10 kΩ (2), 4.7 kΩ (1)
P0_07_TRACECLKpin 33Connected to: Not connected 100%
P0_04_AIN2pin 35Connected to: Not connected 63% · a signal 25%
P0_05_AIN3pin 36Connected to: A connector 22% · not connected 33%
  • Series resistor on 33% · 1.5 kΩ (1), 10 kΩ (1)
P0_15pin 37Connected to: Not connected 71% · a signal 29%
P0_27pin 39Connected to: Not connected 71% · a signal 29%
P0_25pin 41Connected to: Not connected 63% · a signal 38%
P0_31_AIN7pin 42Connected to: Not connected 56% · a signal 33%
  • Pull-up to VCC on 33% · 10 kΩ (1)
P0_11_TRACEDATApin 43Connected to: Not connected 63% · a signal 38%
P0_30_AIN6pin 44Connected to: LTC4124 25%, BQ27441DRZR-G1A 25% · not connected 25%
  • Pull-up to 3.3V on 50% · 10 kΩ (2)
P0_19pin 45Connected to: Not connected 63% · a signal 38%
P0_23pin 47Connected to: Not connected 63% · a signal 38%
P0_28_AIN4pin 48Connected to: MAX17048G+T10 29% · not connected 29%
  • Series resistor on 43% · 10 kΩ (1)
P1_02pin 49Connected to: Not connected 67% · a signal 33%
P1_06pin 50Connected to: Not connected 71% · a signal 29%
P1_15pin 51Connected to: Not connected 71% · a signal 29%
P1_14pin 52Connected to: Not connected 71% · a signal 29%
P1_05pin 54Connected to: Not connected 71% · a signal 29%
P1_03pin 58Connected to: Not connected 83% · a signal 17%
P1_12pin 59Connected to: Not connected 83% · a signal 17%
P1_10pin 60Connected to: Not connected 100%
P1_11pin 61Connected to: Not connected 100%
P1_07pin 62Connected to: Not connected 100%
P1_04pin 63Connected to: Not connected 100%

16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pipar chip by RasmusKoit, Slimenrfaux by SlimeVR, Device by uw-x and WirelessHardware by MalekItani.

The ISP1807-LR-RS in open source designs

The gallery holds 12 open source boards using the ISP1807-LR-RS from 9 GitHub repositories; a typical one measures about 39 × 47.6 mm and carries around 53 components.

58% are two-layer designs, the rest use four layers or more, and 58% carry an open source license.

The most starred is Pipar Point by RasmusKoit.

ISP1807-LR-RS: common questions

Where can I find a ISP1807-LR-RS reference design?

Each of the 12 boards on this page is a real design using the ISP1807-LR-RS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ISP1807-LR-RS OUT_ANT pin connected?

The OUT_ANT pin is left unconnected on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the ISP1807-LR-RS.

How is the ISP1807-LR-RS OUT_MOD pin connected?

The OUT_MOD pin is left unconnected on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the ISP1807-LR-RS.

How is the ISP1807-LR-RS P0_07_TRACECLK pin connected?

The P0_07_TRACECLK pin is left unconnected on 8 of 8 designs. Counted from the KiCad layouts of 9 open source designs using the ISP1807-LR-RS.

What parts are used alongside the ISP1807-LR-RS?

The TPS7A0533PDBVR, B38G3RGB-10D0003H2U1930, BQ24074RGTT, BQ27441DRZR-G1A and DRV8837CDSGR appear in the most repositories here.

How big is a typical board using the ISP1807-LR-RS?

The median is 39 × 47.6 mm, and 58% are two-layer designs.

What is the most popular open source board using the ISP1807-LR-RS?

By GitHub stars, Pipar Point by RasmusKoit, with 56 stars.

Can I simulate one of these boards using the ISP1807-LR-RS before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part