UKMARSBOT LineSensorBasic
About the UKMARSBOT LineSensorBasic PCB
UKMARSBOT LineSensorBasic is an open source PCB design by ukmars, published on GitHub under the MIT license. It is a 2-layer board measuring 40.5 × 81.4 mm, with 30 components from 13 distinct parts.
By type, the board carries 15 resistors, 6 transistors, 6 diodes, 2 capacitors and 1 connector.
From the project
Respository for hardware and software components of UKMARSBOT gemini
Here you will find ECAD design files and resources such as part and footprint libraries.
The project will use KiCAD V8.0.x for all Schematic capture and PCB design.
Part datasheets will be stored in a separate folder.
Kicad models for the pico where found here Install instructions here
UKMARSBOT LineSensorBasic bill of materials (BOM)
30 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | BC337-40 | BC337 | Q1, Q6 |
| 4 | BPW85C | LED_D3.0mm_Clear | Q2, Q3, Q4, Q5 |
| 1 | CONN_01X16 Conn_01x16 | PinSocket_1x16_P2.54mm_Vertical | J1 |
| 3 | TLCR5800 | LED_D5.0mm | D1, D2, D7 |
| 1 | Radius | LED_D5.0mm | D4 |
| 1 | Line | LED_D5.0mm | D5 |
| 1 | S/Finish | LED_D5.0mm | D6 |
| 2 | 100UF 100uF | CP_Radial_D6.3mm_P2.50mm | C1, C2 |
| 1 | 47R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 2 | 390R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R15 |
| 3 | 10R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R5, R17 |
| 2 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R16 |
| 7 | 680R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8, R9, R10, R11, R12, R14 |
UKMARSBOT LineSensorBasic design files
The KiCad project lives in the ukmars/gemini repository on GitHub; these links point at the commit this page was built from.
UKMARSBOT LineSensorBasic: common questions
How big is the UKMARSBOT LineSensorBasic PCB?
The UKMARSBOT LineSensorBasic measures 40.5 × 81.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the UKMARSBOT LineSensorBasic?
30 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the UKMARSBOT LineSensorBasic design files?
From the ukmars/gemini repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the UKMARSBOT LineSensorBasic design in my own project?
Yes, under the terms of its MIT license, which ukmars chose for the repository.
