UKMARSBOT v2 Simple Wall Sensor
About the UKMARSBOT v2 Simple Wall Sensor PCB
UKMARSBOT v2 Simple Wall Sensor is an open source PCB design by ukmars, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 31.2 mm, with 28 components from 17 distinct parts.
By type, the board carries 14 resistors, 6 LEDs, 3 diodes, 2 transistors, 2 capacitors and 1 connector.
It belongs with the sensors designs in this gallery.
From the project
Respository for hardware and software components of UKMARSBOT gemini
Here you will find ECAD design files and resources such as part and footprint libraries.
The project will use KiCAD V8.0.x for all Schematic capture and PCB design.
Part datasheets will be stored in a separate folder.
Kicad models for the pico where found here Install instructions here
UKMARSBOT v2 Simple Wall Sensor bill of materials (BOM)
28 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BC337-40 | TO-92_Inline_Wide | Q1 |
| 1 | BPW85C BC337-40 | TO-92_Inline_Wide | Q2 |
| 1 | CONN_01X16 Conn_01x16 | PinSocket_1x16_P2.54mm_Vertical | J1 |
| 3 | TLCR5800 | LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm | DLED1, DLED2, FLED1 |
| 3 | BPW85C | LED_D3.0mm_Horizontal_O3.81mm_Z2.0mm | FPD1, LDPD1, RDPD1 |
| 2 | TLCR5800 LED | LED_D3.0mm | D1, D2 |
| 1 | LED | LED_D3.0mm | D3 |
| 2 | 100UF 100uF, 16v | CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 1 | 47R 390R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 390R 33R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 10R 390R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 2 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R6 |
| 3 | 680R 10R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8, R9 |
| 3 | 680R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R12, R14 |
| 1 | 680R 2k2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 1 | 2K2 2k2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13 |
| 1 | 390R 1k8 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R15 |
UKMARSBOT v2 Simple Wall Sensor design files
The KiCad project lives in the ukmars/gemini repository on GitHub; these links point at the commit this page was built from.
UKMARSBOT v2 Simple Wall Sensor: common questions
How big is the UKMARSBOT v2 Simple Wall Sensor PCB?
The UKMARSBOT v2 Simple Wall Sensor measures 80 × 31.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the UKMARSBOT v2 Simple Wall Sensor?
28 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the UKMARSBOT v2 Simple Wall Sensor design files?
From the ukmars/gemini repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the UKMARSBOT v2 Simple Wall Sensor design in my own project?
Yes, under the terms of its MIT license, which ukmars chose for the repository.
More boards in gemini
Similar boards
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
FourThirdsEye
will127534
47 × 47 mm106 parts4LMIT377
VESC Controller
paltatech
160 × 90 mm908 parts2LNo license354
OneInchEye
39 × 39 mm79 parts4LMIT346