InductiveSensor LDC1612 Rev3.2
UM-Battery-Control-Group·LDC_Dual_Can·L_Sense_Board_Rev3.2/InductiveSensor_LDC1612_Rev3.2/InductiveSensor_LDC1612_Rev3.2.kicad_pcb
About the InductiveSensor LDC1612 Rev3.2 PCB
InductiveSensor LDC1612 Rev3.2 is an open source STM32 PCB design by UM-Battery-Control-Group, published on GitHub. It is a 4-layer board measuring 88.4 × 52.7 mm, with 58 components from 31 distinct parts.
Its main chip is the STM32F042K6T7, from the STM32 family. Other key parts include the LDC1612DNTR, SN65HVD230DR, TPS73733QDRBRQ1 and HDC1080DMBR. By type, the board carries 22 capacitors, 10 test points, 8 resistors, 5 ICs, 5 crystals and 2 connectors.
From the project
LDC dual channel code for V2 boards
Forgot to tie boot0 to ground so need to set nboot option in cube programmer
Main components on the InductiveSensor LDC1612 Rev3.2
InductiveSensor LDC1612 Rev3.2 bill of materials (BOM)
58 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LDC1612DNTR Inductive Sensor 2Ch | LDC1612 | U1 |
| 1 | STM32F042K6T7 | LQFP-32 | U2 |
| 1 | SN65HVD230DR | SOIC_8 | U3 |
| 1 | TPS73733QDRBRQ1 3.3V/1A | VSON_DRB8 | U4 |
| 1 | HDC1080DMBR I2C Humidity/Temp Sensor | WSON_DMB6 | U5 |
| 1 | KC2520Z40.0000C15XXK 40MHz | KC2520Z_KYO | Q1 |
| 2 | 2170640021 | CONN_2170630000-SD_02_MOL | X1, X4 |
| 2 | 2170640041 | CONN_2170630000-SD_04_MOL | X2, X3 |
| 1 | TSM-104-01-T-SV | CONN_TSM-104-01-T-SV_SAI | X5 |
| 1 | 2170640021 TSM-102-01-X-SV Molex | SAMTEC_TSM-102-01-X-SV | J1 |
| 1 | TSM-102-01-X-SV | SAMTEC_TSM-102-01-X-SV | J2 |
| 8 | 1mm Test Point | TP_1MM | TP1, TP2, TP6, TP9, TP14, TP15, TP20, TP26 |
| 2 | TestPoint | TP_1MM | TP3, TP4 |
| 1 | XC53G2-8.000-F12NJHPK | XTAL_NX5032_NDK | XTAL1 |
| 1 | 5988E60107F GRN-YLW | LED_0603_1608Metric | LED1 |
| 2 | CUS10S30,H3F | USC_TOS | D1, D2 |
| 1 | SenseCoil | COIL_4L | L1 |
| 2 | TAJA106K016RNJ 10uF | CAP1206_TAJA | C1, C13 |
| 1 | CL21B105KBFNNNE 1uF | CAP0805 | C2 |
| 4 | VJ0805A180JXACW1BC 18pF | CAP0805 | C3, C4, C17, C18 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | CC0805KRX7R9BB104 100nF | CAP0805 | C5, C8, C9, C10, C11, C15, C16, C21 |
| 2 | CL10C150JB81PNC 15pF | C0603 | C6, C7 |
| 1 | C0603C472K1TACAUTO 4.7nF | C0603 | C12 |
| 1 | CL21A475KAQNNNE 4.7uF | CAP0805 | C14 |
| 1 | 0603B334K500XD 330nF | C0603 | C19 |
| 1 | CC0805JRNPO9BN511 510pF Yageo | CAP0805 | C20 |
| 1 | CC1206KFX7R9BB475 4.7uF | C_1206_3216Metric | C22 |
| 2 | ERJ-6GEYJ472V 4.7k | RES0805 | R1, R2 |
| 3 | RC0603FR-0710KL 10k | R0603 | R3, R6, R8 |
| 1 | RC0603FR-7W1K5L 1.5k YAGEO | R_0603_1608Metric | R4 |
| 2 | RC0603FR-0760R4L 60.4R | R0603 | R5, R7 |
InductiveSensor LDC1612 Rev3.2 design files
The KiCad project lives in the UM-Battery-Control-Group/LDC_Dual_Can repository on GitHub; these links point at the commit this page was built from.
InductiveSensor LDC1612 Rev3.2: common questions
What microcontroller does the InductiveSensor LDC1612 Rev3.2 use?
The InductiveSensor LDC1612 Rev3.2 is built around the STM32F042K6T7, from the STM32 family.
How big is the InductiveSensor LDC1612 Rev3.2 PCB?
The InductiveSensor LDC1612 Rev3.2 measures 88.4 × 52.7 mm, has 4 copper layers and is 1.361119 mm thick.
How many components are on the InductiveSensor LDC1612 Rev3.2?
58 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the InductiveSensor LDC1612 Rev3.2 design files?
From the UM-Battery-Control-Group/LDC_Dual_Can repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the InductiveSensor LDC1612 Rev3.2 design in my own project?
The repository has no license, so all rights stay with UM-Battery-Control-Group. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the InductiveSensor LDC1612 Rev3.2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in LDC_Dual_Can
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k