6 open source boards using the TPS73733QDRBRQ1
Real designs built with the TPS73733QDRBRQ1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Panel
CMGeldenhuys
179 × 255 mm179 parts4LCERN-OHL-S-2.03RP2040/RP2350
Mouse joystick
peterpolidoro
100 × 80 mm360 parts4LCC-BY-SA-4.01Camera gpio interface
peterpolidoro
100 × 60 mm151 parts4LCC-BY-SA-4.00Tmc5160-usb
janelia-kicad
40 × 40 mm94 parts4LNo license0STM32
InductiveSensor LDC1612 Rev3.2
UM-Battery-Control-Group
88.4 × 52.7 mm58 parts4LNo license0STM32
Kleinvoet
CMGeldenhuys
60 × 66 mm167 parts4LCERN-OHL-S-2.03
How designs wire the TPS73733QDRBRQ1
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS73733QDRBRQ1 connects to, and the resistors, capacitors and other passives placed on it.
- The OUT_1 pin is tied to 3.3V on 5 of 5 designs.
- The 2_2 pin is left unconnected on 5 of 5 designs.
- The 6_6 pin is left unconnected on 5 of 5 designs.
- The 7_7 pin is left unconnected on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUT_1pin 1 | Connected to: 3.3V 100% | — |
| 2_2pin 2 | Connected to: Not connected 100% | — |
| NR_3pin 3 | Connected to: Not connected 60% · a signal 40% |
|
| GND_4pin 4 | Connected to: GND 100% | — |
| EN_5pin 5 | Connected to: Signal 60% · 5V 40% |
|
| 6_6pin 6 | Connected to: Not connected 100% | — |
| 7_7pin 7 | Connected to: Not connected 100% | — |
| IN_8pin 8 | Connected to: 5V 60% · a signal 40% | — |
| PAD_9pin 9 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Kleinvoet by CMGeldenhuys, Mouse joystick pcb by peterpolidoro, Tmc5160-usb by janelia-kicad and Camera gpio interface pcb by peterpolidoro.
The TPS73733QDRBRQ1 in open source designs
The gallery holds 6 open source boards using the TPS73733QDRBRQ1 from 5 GitHub repositories; a typical one measures about 94.2 × 63 mm and carries around 159 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is Panel by CMGeldenhuys.
Parts used alongside the TPS73733QDRBRQ1
Microcontrollers on boards using the TPS73733QDRBRQ1
What boards using the TPS73733QDRBRQ1 are built for
TPS73733QDRBRQ1: common questions
Where can I find a TPS73733QDRBRQ1 reference design?
Each of the 6 boards on this page is a real design using the TPS73733QDRBRQ1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS73733QDRBRQ1 OUT_1 pin connected?
The OUT_1 pin is tied to 3.3V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TPS73733QDRBRQ1.
How is the TPS73733QDRBRQ1 2_2 pin connected?
The 2_2 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TPS73733QDRBRQ1.
How is the TPS73733QDRBRQ1 6_6 pin connected?
The 6_6 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TPS73733QDRBRQ1.
What parts are used alongside the TPS73733QDRBRQ1?
The USBLC6-2P6, BUK7D36-60EX, MAX6816EUS+T, SN74LV541ARKSR and SN74LVC2G17DRYR appear in the most repositories here.
Which microcontrollers do boards using the TPS73733QDRBRQ1 use?
Most are built on STM32 (2) and RP2040/RP2350 (1).
How big is a typical board using the TPS73733QDRBRQ1?
The median is 94.2 × 63 mm, and 0% are two-layer designs.
What is the most popular open source board using the TPS73733QDRBRQ1?
By GitHub stars, Panel by CMGeldenhuys, with 3 stars.
Can I simulate one of these boards using the TPS73733QDRBRQ1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.