He embedded board
umass-hrsl·adjustable-compliance-footwear·PCB design/he_embedded_board/he_embedded_board.kicad_pcb
About the He embedded board
He embedded board is an open source PCB design by umass-hrsl, published on GitHub under the MIT license. It is a 2-layer board measuring 38.1 × 38.1 mm, with 9 components from 6 distinct parts.
Other key parts include the AP2127N-3.3 and TMAG5273A2QDBVR. By type, the board carries 3 capacitors, 3 resistors, 2 ICs and 1 connector.
From the project
Design files for ACFT
This repository contains the design files for the Adjustable Compliance Footwear Technology characterized in:
See the Bill of Materials spreadsheet for a complete list of materials required to build the system, including vendor links and prices as of Oct 2025.
See the CAD folder for Solidworks files for all parts of the assembly. Note that the midsole lattice files were created in Blender and must be unzipped.

Main components on the He embedded board
He embedded board bill of materials (BOM)
9 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2127N-3.3 | SOT-23 | U1 |
| 1 | TMAG5273A2QDBVR | DBV0006A-IPC_A | U2 |
| 1 | Conn_01x07 | CON_5055780571 | J1 |
| 2 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 1 | 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 3 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3 |
He embedded board design files
The KiCad project lives in the umass-hrsl/adjustable-compliance-footwear repository on GitHub; these links point at the commit this page was built from.
He embedded board: common questions
How big is the He embedded board?
The He embedded board measures 38.1 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the He embedded board?
9 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the He embedded board design files?
From the umass-hrsl/adjustable-compliance-footwear repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the He embedded board design in my own project?
Yes, under the terms of its MIT license, which umass-hrsl chose for the repository.