TheRightHASP
About the TheRightHASP PCB
TheRightHASP is an open source NXP PCB design by UMDBPP, published on GitHub. It is a 2-layer board measuring 50.8 × 50.8 mm, with 54 components from 32 distinct parts.
Its main chip is the Teensy3.2Socket, from the NXP family. Other key parts include the ADP1613, ADAS3022, AD8031 and ADR434. By type, the board carries 18 capacitors, 5 ICs, 4 resistors, 3 connectors, 3 diodes and 3 inductors.
From the project
HASP now editable
Main components on the TheRightHASP
TheRightHASP bill of materials (BOM)
54 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ADP1613 | SOP65P490X110-8N | U1 |
| 1 | ADAS3022 | ADAS3022 | U2 |
| 1 | AD8031 | AD8031 | U3 |
| 1 | ADR434 | SOIC127P600X175-8N | U4 |
| 1 | Teensy3.2Socket | Teensy3.2Socket | U5 |
| 1 | Screw_Terminal_1x10 | TerminalBlock_Pheonix_MPT-2.54mm_10pol | J1 |
| 2 | Screw_Terminal_1x02 | TerminalBlock_Pheonix_MPT-2.54mm_2pol | J3, J4 |
| 1 | 12n | C_0603 | CC1 |
| 1 | 10p | C_0603 | CC2 |
| 4 | 1u | C_0603 | CIN1, COUT1, CSS1, CV5 |
| 1 | 2.2u | C_1206 | COUT2 |
| 1 | 4.7u | C_1206 | COUT3 |
| 1 | 1 | R_0603 | RB0 |
| 1 | 100k | R_0603 | RC1 |
| 1 | 50k | R_0805 | REN1 |
| 1 | 47.5k | R_0603 | RF1B1 |
| 1 | 4.22k | R_0603 | RF2 |
| 1 | 1.78 | R_0603 | RFILT1 |
| 1 | 0 | R_0603 | RS1 |
| 1 | DNI | R_0603 | RS2 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 250 | R_0603 | Rled1 |
| 1 | D | D_SOT-23_ANK | Z1 |
| 2 | D | D_SOT-23_ANK | D1, D2 |
| 1 | LED | LED_0603 | D3 |
| 2 | 47 uH | LPD5030-473MRB | L1, L2 |
| 1 | 1u | Neosid_Inductor_SM-NE30_SMD1210 | L3 |
| 1 | 1u | C_0603 | C1 |
| 1 | 1u | C_0805 | C2 |
| 7 | 0.1uF | C_0603 | C3, C4, C5, C8, C12, C14, C18 |
| 8 | 10uF | C_0603 | C6, C7, C9, C10, C11, C13, C15, C16 |
| 1 | 1uF | C_0603 | C17 |
| 4 | 4.7k | R_0603 | R1, R2, R3, R4 |
TheRightHASP design files
The KiCad project lives in the UMDBPP/TheRightHASP repository on GitHub; these links point at the commit this page was built from.
TheRightHASP: common questions
What microcontroller does the TheRightHASP use?
The TheRightHASP is built around the Teensy3.2Socket, from the NXP family.
How big is the TheRightHASP PCB?
The TheRightHASP measures 50.8 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TheRightHASP?
54 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the TheRightHASP design files?
From the UMDBPP/TheRightHASP repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the TheRightHASP design in my own project?
The repository has no license, so all rights stay with UMDBPP. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TheRightHASP without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
Similar boards
NXP32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763
NXPMega-Cube-Board
200 × 54 mm100 parts4LNo license763
NXPMCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532
NXPMCL68
31.6 × 84.1 mm13 parts4LNo license532
NXPMCL65+
72.6 × 64.1 mm6 parts2LNo license532
NXPMCLZ8
37.1 × 61.5 mm6 parts4LNo license532