STM32F1-PCB-Design

UmutMErdem·STM32F1-PCB-Design·KiCad_Project/KiCad_Project.kicad_pcb

STM32F1-PCB-Design layout, top view — open source STM32 board by UmutMErdem

About the STM32F1-PCB-Design

STM32F1-PCB-Design is an open source STM32 PCB design by UmutMErdem, published on GitHub. It is a 2-layer board measuring 41 × 31 mm, with 28 components from 16 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 13 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 crystal and 1 switch.

From the project

In this repo, there is a STM32F103 PCB design project that I developed on KiCad for educational purposes.

Main components on the STM32F1-PCB-Design

STM32F1-PCB-Design bill of materials (BOM)

28 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AMS1117-3.3
U1
1
STM32F103C8T6
U2
1
16MHZ
16MHz
Y1
1
USB_B_Micro
J1
3
CONN_01X04_PIN
Conn_01x04_Pin
J2, J3, J4
1
SW_SPDT
SW1
1
LED
D1
1
120R
FB1
1
10U
10u
C1
5
100N
100n
C2, C3, C4, C5, C11
1
10N
10n
C6
2
1u
C7, C8
2
22U
22u
C9, C10
2
10P
10p
C12, C13
4
1K5
1k5
R1, R3, R4, R5
1
10K
10k
R2

STM32F1-PCB-Design design files

The KiCad project lives in the UmutMErdem/STM32F1-PCB-Design repository on GitHub; these links point at the commit this page was built from.

STM32F1-PCB-Design: common questions

What microcontroller does the STM32F1-PCB-Design use?

The STM32F1-PCB-Design is built around the STM32F103C8T6, from the STM32 family.

How big is the STM32F1-PCB-Design?

The STM32F1-PCB-Design measures 41 × 31 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32F1-PCB-Design?

28 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the STM32F1-PCB-Design design files?

From the UmutMErdem/STM32F1-PCB-Design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the STM32F1-PCB-Design design in my own project?

The repository has no license, so all rights stay with UmutMErdem. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32F1-PCB-Design without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards