Kirpi-STM32-BLE-MPU6050-Board
usarrahim·kirpi-STM32-BLE-MPU6050-Board
About the Kirpi-STM32-BLE-MPU6050-Board
Kirpi-STM32-BLE-MPU6050-Board is an open source STM32 PCB design by usarrahim, published on GitHub. It is a 2-layer board, with 35 components from 18 distinct parts.
Its main chip is the STM32F407VGT6, from the STM32 family. Other key parts include the AP2112K-3.3TRG1 and MPU-6050-A. By type, the board carries 15 capacitors, 9 resistors, 3 ICs, 3 diodes, 2 connectors and 1 crystal.
It belongs with the iot & wireless, power & battery and sensors designs in this gallery.
From the project
STM32-BLE-MPU6050-Board
This repository contains the KiCad hardware design files for a custom, professional-grade motion tracking and wireless communication board. The system is designed to read 6-DoF motion data and transmit it over Bluetooth Low Energy (BLE) to a mobile application (Android/iOS).
The board is designed around a hierarchical schematic structure in KiCad and features the following core components:
Main components on the Kirpi-STM32-BLE-MPU6050-Board
Kirpi-STM32-BLE-MPU6050-Board bill of materials (BOM)
35 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F407VGT6 | QFP50P1600X1600X160-100N | U1 |
| 1 | AP2112K-3.3TRG1 | SOT95P285X140-5N | U2 |
| 1 | MPU-6050-A | QFN50P400X400X95-24N | U3 |
| 1 | 8 MHz | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | TYPE-C-31-M-12 | HRO_TYPE-C-31-M-12 | J1 |
| 1 | Conn_01x04 | PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | HM-10 | 26.9X13X2.2_BOARD | E1 |
| 1 | SW_Push | SW_SPST_B3U-1000P | SW1 |
| 2 | LED_Green | LED_0805_2012Metric | D1, D3 |
| 1 | LED_Blue | LED_0805_2012Metric | D2 |
| 10 | 100nF | C_0805_2012Metric | C1, C2, C3, C4, C7, C8, C10, C11 +2 |
| 2 | 22pF | C_0805_2012Metric | C5, C9 |
| 1 | 2.2nF | C_0805_2012Metric | C6 |
| 2 | 10uF | C_0805_2012Metric | C13, C14 |
| 2 | 4.1k | R_0805_2012Metric | R1, R5 |
| 2 | 10k | R_0805_2012Metric | R2, R3 |
| 2 | 1k | R_0805_2012Metric | R4, R6 |
| 3 | 5.1k | R_0805_2012Metric | R7, R8, R9 |
Kirpi-STM32-BLE-MPU6050-Board design files
The KiCad project lives in the usarrahim/kirpi-STM32-BLE-MPU6050-Board repository on GitHub; these links point at the commit this page was built from.
- Layoutkirpi.kicad_pcb
- Schematickirpi.kicad_sch
Kirpi-STM32-BLE-MPU6050-Board: common questions
What microcontroller does the Kirpi-STM32-BLE-MPU6050-Board use?
The Kirpi-STM32-BLE-MPU6050-Board is built around the STM32F407VGT6, from the STM32 family.
How big is the Kirpi-STM32-BLE-MPU6050-Board?
The Kirpi-STM32-BLE-MPU6050-Board has 2 copper layers and is 1.6 mm thick.
How many components are on the Kirpi-STM32-BLE-MPU6050-Board?
35 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kirpi-STM32-BLE-MPU6050-Board design files?
From the usarrahim/kirpi-STM32-BLE-MPU6050-Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Kirpi-STM32-BLE-MPU6050-Board design in my own project?
The repository has no license, so all rights stay with usarrahim. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Kirpi-STM32-BLE-MPU6050-Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k