Esb
usevolt·esb·hw/esb.kicad_pcb
About the Esb PCB
Esb is an open source NXP PCB design by usevolt, published on GitHub. It is a 2-layer board measuring 78 × 90 mm, with 101 components from 26 distinct parts.
Its main chip is the LPC1549JBD64, from the NXP family. Other key parts include the VN5E010AH, MCP2551_SOIC8, VND5050AJTR-E and OPAMP_MCP6002. By type, the board carries 43 resistors, 17 diodes, 17 capacitors, 15 ICs, 3 connectors and 1 crystal.
From the project
Usewood Engine Supply Board
Main components on the Esb
Esb bill of materials (BOM)
101 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 11 | VN5E010AH | HPAK | U1, U2, U3, U801, U901, U1001, U1101, U1102 +3 |
| 1 | MCP2551_SOIC8 | SOIC8 | U301 |
| 1 | LPC1549JBD64 | QFP64 | U302 |
| 1 | VND5050AJTR-E | PowerSSO-12 | U401 |
| 1 | OPAMP_MCP6002 | SOIC8 | U701 |
| 1 | XTAL_7A-12.000MAAJ-T | XTAL_7A-20.000MAJ | X301 |
| 1 | AMPSEAL_8_POS_1-776276-1 | AMPSEAL_8_POS_776275-1 | J101 |
| 1 | AMPSEAL_23_POS_1-776228-1 | AMPSEAL_23_POS_776200-1 | J102 |
| 1 | ARM_JTAG_SWD_HEADER_10_PINSMD | ARM_10_PIN_JTAG_SWD_CONNECTOR | J301 |
| 1 | OPTOCOUPLER_HCPL-181-000E | HCPL-181-000E | CP401 |
| 1 | FUSE_MC36211_350MA | FUSE_MC36211 | F201 |
| 1 | LM2671SOIC8 | SOIC8 | VR201 |
| 1 | REG_MCP1700 | SOT-23_3-PIN | VR202 |
| 9 | ZENER_MM3Z3V6T1G | SOD-323 | D1, D2, D3, D4, D5, D6, D7, D8 +1 |
| 6 | DIODE_RS07J-GS18 | DO219AB | D101, D102, D201, D204, D701, D702 |
| 1 | DIODE_TVS_SMBJ33A-TRDO-214AA | DO-214AA | D203 |
| 1 | DIODE_TVS_TPSMD28A | DO-214AB | D206 |
| 1 | IND_744045210 | IND_744045210 | L201 |
| 11 | 100nF | 0603 | C1, C201, C205, C301, C302, C303, C304, C305 +3 |
| 1 | CAP_EEE-FK1H470P | CAP_EEE-FK1H470P | C202 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | T491D226K035AT | 7343 | C204 |
| 2 | 18pF | 0603 | C308, C309 |
| 2 | 4.7uF | 0603 | C702, C703 |
| 15 | 10K | 0603 | R1, R2, R3, R4, R5, R6, R9, R104 +7 |
| 26 | 1K | 0603 | R7, R8, R101, R102, R103, R107, R202, R403 +18 |
| 2 | 1K5 | 0603 | R707, R708 |
Esb design files
The KiCad project lives in the usevolt/esb repository on GitHub; these links point at the commit this page was built from.
- Layouthw/esb.kicad_pcb
Esb: common questions
What microcontroller does the Esb use?
The Esb is built around the LPC1549JBD64, from the NXP family.
How big is the Esb PCB?
The Esb measures 78 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esb?
101 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esb design files?
From the usevolt/esb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Esb design in my own project?
The repository has no license, so all rights stay with usevolt. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esb without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
Similar boards
NXP
32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763NXP
Mega-Cube-Board
MaltWhiskey
200 × 54 mm100 parts4LNo license763NXP
MCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532NXP
MCL68
MicroCoreLabs
31.6 × 84.1 mm13 parts4LNo license532NXP
MCL65+
MicroCoreLabs
72.6 × 64.1 mm6 parts2LNo license532NXP
MCLZ8
MicroCoreLabs
37.1 × 61.5 mm6 parts4LNo license532