TinyLoRaEink
Uspizig·TinyLoRaEink·TinyLora102/TinyLora102.kicad_pcb
About the TinyLoRaEink PCB
TinyLoRaEink is an open source PCB design by Uspizig, published on GitHub. It is a 2-layer board measuring 22 × 37 mm, with 29 components from 15 distinct parts.
By type, the board carries 8 resistors, 7 capacitors, 6 diodes, 5 connectors and 1 antenna.
It belongs with the rf & radio and displays & leds designs in this gallery.
From the project
A LoRa Extension for a TTGO Mini E-Paper Core
This is a Lora Shield for the Lilygo Mini Epaper Core 1.05". With this shield you may enable LoRa Communication, Chirpstack or stupid Helium on a Lilygo Mini Epaper Core ESP32 (Not the S3 for now)
Schematic(PDF) Gerber Files(Zip File) Demofiles for reading out a Bresser Weather Station Changes in the SW for https://github.com/mcci-catena/arduino-lmic You may change the following lines in the SW of Arduino-LMIC: To do this Change in the folder Arduino\libraries\arduino-lmic-master\src\hal the File hal.cpp the function "static void halspiinit to": static void halspiinit () {…
TinyLoRaEink bill of materials (BOM)
29 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x04_Male | PinHeader_1x04_P2.54mm_Vertical | J1, J5 |
| 1 | Conn_01x07_Male | PinHeader_1x07_P2.54mm_Vertical_SMD_Pin1Left | J3 |
| 1 | Conn_01x08_Male | PinHeader_1x08_P2.54mm_Vertical_SMD_Pin1Left | J4 |
| 1 | Conn_01x08_Female | PinHeader_1x08_P1.27mm_Vertical | J6 |
| 1 | Antenna_Shield | SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | AE1 |
| 1 | PAM8403 | SOP-16_4.55x10.3mm_P1.27mm | PAM8403 |
| 1 | RFM95W-868S2 | HOPERF_RFM9XW_SMD_3D | RFM95 |
| 4 | MBR0530 | D_SOD-123 | D1, D2, D3, D4 |
| 1 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D5 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 3 | C | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C5 |
| 2 | 0.47uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C4 |
| 2 | 22uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6, C7 |
| 5 | 10K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R5, R6, R7, R8 |
| 3 | R | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3, R4 |
TinyLoRaEink design files
The KiCad project lives in the Uspizig/TinyLoRaEink repository on GitHub; these links point at the commit this page was built from.
TinyLoRaEink: common questions
How big is the TinyLoRaEink PCB?
The TinyLoRaEink measures 22 × 37 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TinyLoRaEink?
29 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the TinyLoRaEink design files?
From the Uspizig/TinyLoRaEink repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the TinyLoRaEink design in my own project?
The repository has no license, so all rights stay with Uspizig. Use it as a reference, and ask the author before reusing the design.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k