Maglev hardware
ussserrr·maglev-hardware
About the Maglev hardware PCB
Maglev hardware is an open source PCB design by ussserrr, published on GitHub. It is a 2-layer board measuring 53.3 × 27.9 mm, with 17 components from 12 distinct parts.
Other key parts include the LM7805. By type, the board carries 7 resistors, 3 diodes, 2 transistors, 2 capacitors, 1 IC and 1 inductor.
From the project
Schematic and PCB for maglev projects
Main components on the Maglev hardware
Maglev hardware bill of materials (BOM)
17 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM7805 | TO-220_Neutral123_Vertical | U1 |
| 1 | BC237 | TO-92_Molded_Wide_Oval | Q1 |
| 1 | IRF640 | TO-220_Neutral123_Vertical | Q2 |
| 1 | A1302 | TO-220_Neutral123_Vertical | B1 |
| 2 | LED | C_Rect_L4_W2.5_P2.5 | D1, D2 |
| 1 | 1N4004 | Diode_DO-41_SOD81_Horizontal_RM10 | D3 |
| 1 | COIL | Resistor_Vertical_RM5mm | L1 |
| 1 | 100u | C_Radial_D5_L6_P2.5 | C1 |
| 1 | 10u | C_Radial_D5_L6_P2.5 | C2 |
| 5 | 1k | Resistor_Horizontal_RM10mm | R1, R2, R3, R5, R6 |
| 1 | 430 | Resistor_Horizontal_RM10mm | R4 |
| 1 | 10k | Resistor_Horizontal_RM10mm | R7 |
Maglev hardware design files
The KiCad project lives in the ussserrr/maglev-hardware repository on GitHub; these links point at the commit this page was built from.
- Layoutschematic.kicad_pcb
Maglev hardware: common questions
How big is the Maglev hardware PCB?
The Maglev hardware measures 53.3 × 27.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Maglev hardware?
17 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Maglev hardware design files?
From the ussserrr/maglev-hardware repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Maglev hardware design in my own project?
The repository has no license, so all rights stay with ussserrr. Use it as a reference, and ask the author before reusing the design.