107 open source boards using the LM7805

Real designs built with the LM7805, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

107 boardsClear filters|Most starred

How designs wire the LM7805

Read from the KiCad layouts of 74 open source designs, one per repository: what each pin of the LM7805 connects to, and the resistors, capacitors and other passives placed on it.

  • The VI pin has a decoupling capacitor on 37 of 68 designs, most often 100 nF (then 330 nF).
  • The VO pin has a decoupling capacitor on 37 of 68 designs, most often 100 nF (then 1 µF).
VIpin 1Connected to: 12V 57% · a signal 43%
  • Decoupling capacitor on 54% · 100 nF (15), 330 nF (10), 10 µF (6)
GNDpin 2Connected to: GND 96%
VOpin 3Connected to: 5V 74% · a signal 25%
  • Decoupling capacitor on 54% · 100 nF (23), 1 µF (12), 10 µF (5)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BPi-CAN by GBert, AS3397 proto DIP by PhysicsDptAngers, Adjustable Modular Power Supply by thebiguno and 12v automatic ups by dilshan.

The LM7805 in open source designs

The gallery holds 107 open source boards using the LM7805 from 81 GitHub repositories; a typical one measures about 100 × 83.8 mm and carries around 55 components.

93% are two-layer designs, the rest use four layers or more, and 31% carry an open source license.

The most starred is BPi-CAN by GBert.

Microcontrollers on boards using the LM7805

LM7805: common questions

Where can I find a LM7805 reference design?

Each of the 107 boards on this page is a real design using the LM7805. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LM7805 VI pin?

The VI pin has a decoupling capacitor on 37 of 68 designs, most often 100 nF (then 330 nF). Counted from the KiCad layouts of 74 open source designs using the LM7805.

What decoupling capacitors do designs use on the LM7805 VO pin?

The VO pin has a decoupling capacitor on 37 of 68 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 74 open source designs using the LM7805.

What parts are used alongside the LM7805?

The ATmega328P-PU, MCP2551-I-SN, MCP2515-xSO, 4N25 and LM7812 appear in the most repositories here.

Which microcontrollers do boards using the LM7805 use?

Most are built on AVR/Arduino (47), PIC (8), ESP32 (5) and ESP8266 (4).

How big is a typical board using the LM7805?

The median is 100 × 83.8 mm, and 93% are two-layer designs.

What is the most popular open source board using the LM7805?

By GitHub stars, BPi-CAN by GBert, with 99 stars.

Can I simulate one of these boards using the LM7805 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part