Compressor front
UTS-500-Series·Compressor·kicad_withpcb/compressor_front/compressor_front.kicad_pcb
About the Compressor front PCB
Compressor front is an open source PCB design by UTS-500-Series, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 35 × 110 mm, with 39 components from 16 distinct parts.
Other key parts include the LM3914. By type, the board carries 20 diodes, 4 switches, 4 resistors, 3 capacitors, 2 ICs and 1 connector.
From the project
A 35 × 110 mm board that sits flat behind the faceplate and carries everything on the panel: the five pots, the four toggles, and both LED meters with their two LM3914 drivers. It joins the main board with a 30-way ribbon from J1 here to J2 on the main board, pin for pin, with th
A 35 × 110 mm board that sits flat behind the faceplate and carries everything on the panel: the five pots, the four toggles, and both LED meters with their two LM3914 drivers. It joins the main board with a 30-way ribbon from J1 here to J2 on the main board, pin for pin, with the same net names in both schematics.
The parts are the ones drawn in the main schematic. They stay drawn there (excluded from that board and its BOM) so the circuit still reads as one piece.
Main components on the Compressor front
Compressor front bill of materials (BOM)
39 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LM3914 | DIP-18_W7.62mm | U9, U10 |
| 1 | MAIN BOARD | PinHeader_2x15_P2.54mm_Vertical | J1 |
| 2 | 10k | Potentiometer_Alps_RK09K_Single_Vertical | RV2, RV5 |
| 1 | 100kA | Potentiometer_Alps_RK09K_Single_Vertical | RV3 |
| 1 | 100k | Potentiometer_Alps_RK09K_Single_Vertical | RV4 |
| 1 | 1M | Potentiometer_Alps_RK09K_Single_Vertical | RV6 |
| 1 | BYPASS | SW_Toggle_Mini_DPDT_Salecom_S1350 | SW1 |
| 1 | INT/EXT | SW_Toggle_Mini_SPDT_Salecom_S1315 | SW2 |
| 1 | HPF DEFEAT | SW_Toggle_Mini_SPDT_Salecom_S1315 | SW3 |
| 1 | LINK | SW_Toggle_Mini_SPDT_Salecom_S1315 | SW4 |
| 20 | meter | LED_D2.0mm_W4.0mm_H2.8mm_FlatTop | D20, D21, D22, D23, D24, D25, D26, D27 +12 |
| 2 | 100n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C36, C37 |
| 1 | 47u | CP_Radial_D6.3mm_P2.50mm | C38 |
| 2 | 2k7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R89, R91 |
| 1 | 8k2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R90 |
| 1 | 4k7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R92 |
Compressor front design files
The KiCad project lives in the UTS-500-Series/Compressor repository on GitHub; these links point at the commit this page was built from.
Compressor front: common questions
How big is the Compressor front PCB?
The Compressor front measures 35 × 110 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Compressor front?
39 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Compressor front design files?
From the UTS-500-Series/Compressor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Compressor front design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which UTS-500-Series chose for the repository.