HardLabs

Pre:discharge

uvmaero·CleanSpeed_6.0_Board·Documentation/Pre:discharge/Pre:discharge.kicad_pcb

This repository ships a schematic but no board layout.

About the Pre:discharge PCB

Pre:discharge is an open source PCB design by uvmaero, published on GitHub. It is a 2-layer board, with 15 components from 9 distinct parts.

By type, the board carries 4 relays, 4 resistors, 2 battery holders and 1 capacitor.

From the project

PCBs for Clean Speed 6.0

Pre:discharge bill of materials (BOM)

15 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
Battery
BT1, BT2
4
~
Contactor1, Contactor2, Contactor3, Contactor4
2
SILxx-1Axx-71x
K1, K4
2
MSxx-1Bxx-75
K2, K3
1
15U
Motor_Controller
C1
1
Pre-Charge
R1
1
Dis-Charge
R2
1
20K
Dis-Charge
R3
1
20K
Pre-Charge
R4

Pre:discharge design files

The KiCad project lives in the uvmaero/CleanSpeed_6.0_Board repository on GitHub; these links point at the commit this page was built from.

Pre:discharge: common questions

How big is the Pre:discharge PCB?

The Pre:discharge has 2 copper layers and is 1.6 mm thick.

How many components are on the Pre:discharge?

15 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pre:discharge design files?

From the uvmaero/CleanSpeed_6.0_Board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Pre:discharge design in my own project?

The repository has no license, so all rights stay with uvmaero. Use it as a reference, and ask the author before reusing the design.

More boards in CleanSpeed_6.0_Board