Hydra board
UWCubeSat·hydra-board
About the Hydra board
Hydra board is an open source STM32 PCB design by UWCubeSat, published on GitHub. It is a 4-layer board measuring 95.9 × 90.2 mm, with 19 components from 13 distinct parts.
Its main chip is the STM32L151RCT6, from the STM32 family. Other key parts include the AMS1117-3.3 and USBLC6-2SC6. By type, the board carries 11 capacitors, 3 ICs, 2 connectors, 1 crystal, 1 diode and 1 resistor.
From the project
HYDRA: HuskY Deterministic Real-time Avionics PCB
Main components on the Hydra board
Hydra board bill of materials (BOM)
19 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | STM32L151RCT6 | LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | PC104 Interconnect | PinHeader_2x32_P2.54mm_Vertical | J2 |
| 1 | USB-C | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J3 |
| 1 | Power LED | LED_0603_1608Metric | D1 |
| 2 | 3pF | C_0603_1608Metric | C1, C11 |
| 1 | 10uF | C_0603_1608Metric | C2 |
| 1 | 22uF | C_0603_1608Metric | C3 |
| 1 | 4.7uF | C_0603_1608Metric | C4 |
| 6 | 0.1uF | C_0603_1608Metric | C5, C6, C7, C8, C9, C10 |
| 1 | 5.1k | R_0603_1608Metric | R1 |
Hydra board design files
The KiCad project lives in the UWCubeSat/hydra-board repository on GitHub; these links point at the commit this page was built from.
- Layouthydra.kicad_pcb
- Schematichydra.kicad_sch
Hydra board: common questions
What microcontroller does the Hydra board use?
The Hydra board is built around the STM32L151RCT6, from the STM32 family.
How big is the Hydra board?
The Hydra board measures 95.9 × 90.2 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Hydra board?
19 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hydra board design files?
From the UWCubeSat/hydra-board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Hydra board design in my own project?
The repository has no license, so all rights stay with UWCubeSat. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Hydra board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k