8bit quad.hw

VasilKalchev·8bit-quad.hw·fc/8bit-quad-fc.kicad_pcb

8bit quad.hw PCB layout, top view — open source AVR/Arduino board by VasilKalchev

About the 8bit quad.hw PCB

8bit quad.hw is an open source AVR/Arduino PCB design by VasilKalchev, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 113 × 113.2 mm, with 66 components from 43 distinct parts.

Its main chip is the ATMEGA328P-PU, from the AVR/Arduino family. Other key parts include the F450_TOP_PLATE and ANTI-VIBRATION_PLATE. By type, the board carries 24 capacitors, 11 resistors, 7 connectors, 3 transistors, 3 test points and 3 inductors.

It belongs with the robotics & motion designs in this gallery.

From the project

Flight controller PCB for a custom-built quadcopter based on the ATmega328 microcontroller.

Flight controller PCB for a custom-built quadcopter based on the ATmega328 microcontroller. An IMU, an nRF24L01+ radio and four ESC outputs on a 113 mm octagon shaped to the top plate of an F450 frame.

It was etched at home, populated, flown, and retired. This repository is an archive of it, not a design anyone is expected to build. The firmware that ran on it is in its own repository.

8bit quad.hw, from the project README
From the project README

Main components on the 8bit quad.hw

F450_TOP_PLATEANTI-VIBRATION_PLATE

8bit quad.hw bill of materials (BOM)

66 components, 43 distinct parts.

QtyPartRefs
1
F450_TOP_PLATE
U$2
1
ANTI-VIBRATION_PLATE
U$3
3
TSM3404
Q1L0, Q1P0, Q2L0
2
—
J1L0, J2L0
1
TL
J1M0
1
LiPo
J1P0
1
TR
J2M0
1
BL
J3M0
1
BR
J4M0
1
Restart
B1U0
1
2A
F1P0
1
—
FTDI0
2
1 mm hole
H1, H2
1
MPU6050/9250
IMU0
1
MPU6050/9250
IMU_MINI0
1
AVRISP-6
ISP0
1
nRF24L01+
NRF24L01+0
1
0V
TP1
1
3.3V
TP2
1
5.0V
TP3
Show 23 more
QtyPartRefs
1
ATMEGA328P-PU
UC0
1
7805
VR1
1
TS1117BCW-3.3
VR2
1
16MHz
XTAL0
1
blue
L1P0
1
red
L1U0
1
green
L2U0
8
10u
C1B0, C1U0, C2P0, C3P0, C4I0, C4N0, C4P0, C6P0
2
100p
C1I0, C1N0
6
100n
C1P0, C2U0, C3I0, C3N0, C4U0, C5U0
2
22p
C1X0, C2X0
2
1n
C2I0, C2N0
1
470p
C3U0
2
100u_6.3x5.3
C5I0, C5N0
1
10n
C5P0
1
110k
R1AB0
1
20k
R1BB0
2
100k
R1L0, R3L0
1
680
R1P0
1
10k
R1U0
1
9k1
R2B0
2
33
R2L0, R4L0
2
130
R2U0, R3U0

8bit quad.hw design files

The KiCad project lives in the VasilKalchev/8bit-quad.hw repository on GitHub; these links point at the commit this page was built from.

8bit quad.hw: common questions

What microcontroller does the 8bit quad.hw use?

The 8bit quad.hw is built around the ATMEGA328P-PU, from the AVR/Arduino family.

How big is the 8bit quad.hw PCB?

The 8bit quad.hw measures 113 × 113.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 8bit quad.hw?

66 components, from 43 distinct parts. The full bill of materials is listed on this page.

Where can I download the 8bit quad.hw design files?

From the VasilKalchev/8bit-quad.hw repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the 8bit quad.hw design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which VasilKalchev chose for the repository.

Can I test firmware for the 8bit quad.hw without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards