TI-CUBE-Backplane
VE7PMC·TI-CUBE·KiCad/TI-CUBE-Backplane/TI-CUBE-Backplane.kicad_pcb
About the TI-CUBE-Backplane PCB
TI-CUBE-Backplane is an open source PCB design by VE7PMC, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 99.7 × 99.7 mm, with 27 components from 11 distinct parts.
By type, the board carries 3 connectors, 2 diodes, 2 capacitors and 2 resistors.
It belongs with the test & measurement designs in this gallery.
From the project
A homebrew microcomputer system based on the Texas Instruments TMS 9900 CPU.
These folders contain the schematic and PCB design files for the four boards and backplane in KiCad 9.0.7 format.
TI-CUBE-Backplane bill of materials (BOM)
27 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4-pin Berg | TE_171825-4 | J1 |
| 2 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J2, J3 |
| 1 | TI CUBE bus | PinHeader_2x36_P2.54mm_Horizontal | EXP1 |
| 1 | TI CUBE bus | PinSocket_2x36_P2.54mm_Horizontal | EXP2 |
| 4 | TI CUBE bus | PinSocket_2x36_P2.54mm_Vertical | SLOT1, SLOT2, SLOT3, SLOT4 |
| 6 | USER1 | TestPoint_THTPad_D1.5mm_Drill0.7mm | USER1, USER4, USER5, USER7, USER9, USER11 |
| 6 | USER2 | TestPoint_THTPad_D1.5mm_Drill0.7mm | USER2, USER3, USER6, USER8, USER10, USER12 |
| 2 | RED LED | LED_D3.0mm | D1, D2 |
| 2 | 47 uF | CP_Radial_D6.3mm_P2.50mm | C1, C2 |
| 1 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
TI-CUBE-Backplane design files
The KiCad project lives in the VE7PMC/TI-CUBE repository on GitHub; these links point at the commit this page was built from.
TI-CUBE-Backplane: common questions
How big is the TI-CUBE-Backplane PCB?
The TI-CUBE-Backplane measures 99.7 × 99.7 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the TI-CUBE-Backplane?
27 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TI-CUBE-Backplane design files?
From the VE7PMC/TI-CUBE repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TI-CUBE-Backplane design in my own project?
Yes, under the terms of its GPL-3.0 license, which VE7PMC chose for the repository.
More boards in TI-CUBE
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kEleLab v2 Frontpanel a
Chrismettal
88 × 25 mm23 parts2LGPL-3.0528EleLab v2 Bus150
Chrismettal
150 × 50 mm37 parts2LGPL-3.0528EleLab v2 PowerFeed
Chrismettal
68 × 50 mm11 parts2LGPL-3.0528