DASH SCH
Vedika-Doke·EE_Wisdom·JDE-Tenure/DASH_PCB_STM32/stm32_dash/pcb/DASH_SCH.kicad_pcb
About the DASH SCH PCB
DASH SCH is an open source STM32 PCB design by Vedika-Doke, published on GitHub. It is a 2-layer board measuring 62 × 61 mm, with 82 components from 39 distinct parts.
Its main chip is the STM32G0B1KETxN, from the STM32 family. Other key parts include the CPC1006N, UCC2946D, ZLDO1117G33TA and HSS10-B20-P40. By type, the board carries 30 resistors, 13 capacitors, 8 ICs, 5 LEDs, 1 connector and 1 fuse.
From the project
This repository contains my academic projects, research work, and hands-on engineering experience across core electrical engineering, embedded systems, digital design, and hardware development.
Main components on the DASH SCH
DASH SCH bill of materials (BOM)
82 components, 39 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ~ | SOIC127P600X175-8N | IC1, IC4 |
| 2 | CPC1006N | SOP254P610X216-4N | IC2, IC3 |
| 1 | UCC2946D | SOIC127P599X175-8N | U1 |
| 1 | ZLDO1117G33TA | SOT230P700X185-4N | U2 |
| 1 | HSS10-B20-P40 | HSS10B20P40 | U3 |
| 1 | STM32G0B1KETxN | LQFP-32_7x7mm_P0.8mm | U5 |
| 1 | MA04-1_PINHEADERS | MA04-1 | CON0 |
| 2 | ~ | TSOP-6_NMOS | 1111, 1211 |
| 3 | MA04-1_PINHEADERS | MA04-1 | BAT_SIGS0, ST_LINK_CONNECTIONS1, Upload1 |
| 8 | HEADER_POS4_?43045-0412 | 43045-0412 | CAN_SIG0, ERR_LED_SIGS_CON0, ERR_SIGS0, INDICATORS1, LM2596_SUPPLY0, LTE_CON0, NXT_SIG0, SUPPLY0 |
| 2 | SN65HVD230/1 | SO8 | C_CAN0, D_CAN0 |
| 2 | MA03-1 | MA03-1_162 | ERR_IN_SIGS0, ERR_LED_SIGS0 |
| 1 | 1206L | 1206L | F2 |
| 2 | 0.33uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | IN_CAP0, IN_CAP1 |
| 1 | L7805CV-DG | TO255P460X1020X2008-3P | LM7805 |
| 2 | 0.1uF | C0805 | OUT_CAP0, OUT_CAP1 |
| 1 | TSOP-6_PMOS | TSOP-6_PMOS | PMOS0 |
| 1 | JP2E | JP2_252 | UNK5V_JPR0 |
| 1 | 12V_LED | LED-1206 | 12V_LED1 |
| 1 | AMS_LED | LED-1206 | AMS_LED0 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IMD_LED | LED-1206 | IMD_LED0 |
| 1 | ~ | LED-1206 | LED1 |
| 1 | TS_OFF_LED | LED-1206 | TS_OFF_LED0 |
| 1 | 10uF | C_0805_2012Metric | C1 |
| 5 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C8, C9, C13 |
| 2 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C10 |
| 1 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 2 | 64nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7 |
| 2 | 4.7uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C12 |
| 13 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R5, R6, R7, R11, R13, R14, R16 +5 |
| 2 | 4K7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4 |
| 1 | 33K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 3 | 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R19, R26 |
| 2 | 102K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R12 |
| 3 | 100E | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R15, R37 |
| 3 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18, R22, R23 |
| 1 | R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
| 1 | 20k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28 |
| 1 | 30k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R29 |
DASH SCH design files
The KiCad project lives in the Vedika-Doke/EE_Wisdom repository on GitHub; these links point at the commit this page was built from.
DASH SCH: common questions
What microcontroller does the DASH SCH use?
The DASH SCH is built around the STM32G0B1KETxN, from the STM32 family.
How big is the DASH SCH PCB?
The DASH SCH measures 62 × 61 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DASH SCH?
82 components, from 39 distinct parts. The full bill of materials is listed on this page.
Where can I download the DASH SCH design files?
From the Vedika-Doke/EE_Wisdom repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DASH SCH design in my own project?
The repository has no license, so all rights stay with Vedika-Doke. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the DASH SCH without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in EE_Wisdom
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k