Pcb studio
Vickyrrrrrr·pcb-studio·hardware/stm32-blinky/stm32-blinky.kicad_pcb
About the Pcb studio
Pcb studio is an open source STM32 PCB design by Vickyrrrrrr, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 50 mm, with 13 components from 11 distinct parts.
Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 4 capacitors, 3 resistors, 2 ICs, 2 connectors, 1 crystal and 1 diode.
From the project
Chat with an AI that designs real KiCad boards. Runs fully on your machine (or WSL).
Chat with an AI that designs real KiCad boards. Runs fully on your machine (or WSL).
Before choosing a setup, read Windows and WSL. They can share board files, but they do not share OpenCode sessions, credentials, or global plugin installs.
After the package is published to npm, create a new, empty workspace without copying files manually:
The command refuses to overwrite an existing directory. Until publication, use git clone in the setup instructions below.
Main components on the Pcb studio
Pcb studio bill of materials (BOM)
13 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | 8MHz | Crystal_HC49-4H_Vertical | Y1 |
| 1 | USB_C_6P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | SWD_10 | PinHeader_2x05_P1.27mm_Vertical | J2 |
| 1 | GREEN | LED_0603_1608Metric | D1 |
| 1 | 100nF | C_0603_1608Metric | C1 |
| 1 | 10uF | C_0805_2012Metric | C2 |
| 2 | 20pF | C_0603_1608Metric | C3, C4 |
| 1 | 1k | R_0603_1608Metric | R1 |
| 2 | 5.1k | R_0603_1608Metric | R2, R3 |
Pcb studio design files
The KiCad project lives in the Vickyrrrrrr/pcb-studio repository on GitHub; these links point at the commit this page was built from.
Pcb studio: common questions
What microcontroller does the Pcb studio use?
The Pcb studio is built around the STM32F103C8Tx, from the STM32 family.
How big is the Pcb studio?
The Pcb studio measures 80 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pcb studio?
13 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pcb studio design files?
From the Vickyrrrrrr/pcb-studio repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pcb studio design in my own project?
Yes, under the terms of its MIT license, which Vickyrrrrrr chose for the repository.
Can I test firmware for the Pcb studio without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k